NWXR483EGWW - Tumble dryer HOTPOINT - Free user manual and instructions
Find the device manual for free NWXR483EGWW HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Vented Tumble Dryer |
| Brand | Hotpoint |
| Model | NWXR483EGWW |
| Capacity | 7.3 kg |
| Drum Volume | 120 L |
| Energy Class | C (based on EU 2019/2014) |
| Annual Energy Consumption | 564 kWh |
| Drying Programs | Cotton, Synthetics, Delicates, Time Dry, Refresh, etc. |
| Control Type | Rotary Knob + Push Buttons |
| Display | LED |
| Lint Filter | Yes, in door opening |
| Condenser | No (vented) |
| Reverse Tumbling | Yes |
| Anti-Crease Function | Yes |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Noise Level | 65 dB (A) |
| Dimensions (H x W x D) | 85 x 59.5 x 60 cm |
| Weight | 38 kg |
| Power Consumption (W) | 220-240 V, 50 Hz, 2600 W |
| Door Opening | Side hinged, reversible |
| Installation Type | Freestanding |
| Warranty | 2 years |
| Spare Parts Availability | Up to 10 years |
Frequently Asked Questions - NWXR483EGWW HOTPOINT
How do I clean the lint filter on my Hotpoint NWXR483EGWW dryer?
Open the door and pull out the lint filter located at the bottom of the door opening. Remove lint by hand or with a soft brush, then rinse under warm water if needed. Ensure it is completely dry before reinserting.
What is the maximum load capacity for the Hotpoint NWXR483EGWW?
The maximum load capacity is 7.3 kg for cotton programs. Overloading can affect drying performance and increase energy consumption.
Why is my dryer not drying clothes completely?
Check if the lint filter is clogged, the vent hose is blocked, or the load is too large. Ensure the correct program is selected for the fabric type. Also verify that the room temperature is not too low.
How do I change the door swing direction on the NWXR483EGWW?
The door can be reversed. You need to unscrew the hinge brackets from the door and cabinet, then reattach them on the opposite side. Refer to the user manual for detailed steps.
What does the 'E10' error code mean on my Hotpoint dryer?
Error E10 typically indicates a blocked vent system. Turn off the dryer, clean the lint filter and check the exhaust hose for kinks or blockages. If the error persists, contact a qualified technician.
Can I use fabric softener sheets in this dryer?
Yes, fabric softener sheets can be used. Place one sheet on top of the wet clothes before starting the cycle. Do not use more than one sheet per load.
How often should I clean the condenser (if applicable) on the NWXR483EGWW?
This model is a vented dryer and does not have a condenser. The lint filter should be cleaned after every cycle. For vented dryers, periodically check and clean the external vent to maintain efficiency.
Where can I find replacement parts for my Hotpoint NWXR483EGWW?
Authorized spare parts can be purchased from Hotpoint's official website or through certified dealers. Use the model number NWXR483EGWW to ensure compatibility.
What is the energy rating of this dryer and how much does it cost to run?
The dryer has an energy class of C. Based on an annual consumption of 564 kWh, the estimated running cost depends on your local electricity rates. For example, at $0.12/kWh, it would cost about $67.68 per year.
How do I use the delay start feature?
Select your drying program, then press the 'Delay Start' button repeatedly to set the desired time (up to 24 hours). The dryer will start automatically after the delay period ends.
User questions about NWXR483EGWW HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual NWXR483EGWW - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NWXR483EGWW by HOTPOINT.