Hubbell

J67T - Heating Hubbell - Free user manual and instructions

Find the device manual for free J67T Hubbell in PDF.

📄 40 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hubbell J67T - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Space Heater
Brand Hubbell
Model J67T
Heating Technology Fan-Forced Convection
Voltage 120V AC
Wattage 1500W
Coverage Area Up to 150 sq. ft.
Dimensions (H x W x D) 10 x 8 x 6 inches
Weight 5 lbs
Thermostat Adjustable with settings
Safety Features Overheat Protection, Tip-Over Switch
Maintenance Wipe exterior with dry cloth; no internal cleaning needed
Spare Parts Availability Contact Hubbell Customer Service
Warranty 1 Year Limited
Certifications UL Listed
Cord Length 6 ft

Frequently Asked Questions - J67T Hubbell

How do I reset the Hubbell J67T heater if it shuts off unexpectedly?
First, unplug the heater and let it cool down for at least 10 minutes. Then plug it back in and turn it on. If the problem persists, check for blocked airflow or contact customer support.
Why is the heater blowing cold air?
Ensure the thermostat is set to a temperature higher than the room temperature. Also, check that the heater is not in fan-only mode (if applicable). If it still blows cold, the heating element may need replacement.
Can I use an extension cord with the J67T heater?
No. This heater requires a direct connection to a properly grounded wall outlet. Using an extension cord can cause overheating and fire hazard.
How should I clean the heater?
Unplug the heater and wait for it to cool. Wipe the exterior with a soft, dry cloth. Do not use water or cleaning chemicals, and do not disassemble the unit.
What room size is the J67T suitable for?
The heater can effectively warm rooms up to 150 square feet (approximately 14 square meters). For larger spaces, multiple units may be needed.
Is it safe to use the heater in a bathroom?
The J67T is not rated for bathroom use. Keep it away from water and moisture to avoid electric shock.
Does the heater have a timer or remote control?
No. The heater features manual controls with an adjustable thermostat and power settings. There is no built-in timer or remote.
How do I store the heater when not in use?
Allow the heater to cool completely, then wrap the cord around the cord wrap (if present). Store in a cool, dry place away from direct sunlight.
The heater trips the circuit breaker. What should I do?
Unplug the heater and try a different outlet on a separate circuit. If it still trips, the heater may be defective. Contact Hubbell support for assistance.
Are spare parts available for the J67T?
Yes, replacement parts such as heating elements and fans can be ordered through Hubbell customer service. Check the manual for part numbers and instructions.

User questions about J67T Hubbell

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual J67T - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J67T by Hubbell.

USER MANUAL J67T Hubbell

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hubbell

Model : J67T

Category : Heating