J1630T4 - Heating Hubbell - Free user manual and instructions
Find the device manual for free J1630T4 Hubbell in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Space Heater |
| Model | J1630T4 |
| Brand | Hubbell |
| Power Source | 120V AC, 60 Hz |
| Wattage | 1500W |
| Heating Element | PTC ceramic |
| Dimensions (W x H x D) | 12.5 x 10.5 x 8.5 inches |
| Weight | 3.5 lbs |
| Thermostat | Adjustable thermostat with auto shut-off |
| Safety Features | Tip-over protection, overheat protection |
| Main Functions | Heating, fan-only mode, oscillation |
| Controls | Manual dials or buttons (model dependent) |
| Coverage Area | Up to 150 sq. ft. |
| Noise Level | Approx. 40 dB (low setting) |
| Maintenance | Clean exterior with dry cloth; do not immerse |
| Filter Type | Washable foam filter |
| Spare Parts Available | Replacement filters, power cords |
| Repairability Index | 6/10 (some parts user-replaceable) |
| Certifications | UL listed, ETL |
| Warranty | 1 year limited |
Frequently Asked Questions - J1630T4 Hubbell
How do I set the thermostat on my Hubbell J1630T4 heater?
Turn the thermostat dial to your desired temperature. The heater will cycle on and off to maintain that setting. For precise control, use a separate room thermometer.
What does the tip-over safety feature do?
If the heater is accidentally knocked over, it will automatically shut off to prevent fire risk. Make sure the heater is on a flat, stable surface.
How often should I clean the filter?
Clean the foam filter every two weeks during heavy use. Remove it, rinse with water, let dry completely, then reinstall. A dirty filter reduces efficiency.
Can I use the heater in a bathroom?
Only if it is a model specifically rated for bathroom use. The J1630T4 is not designed for wet locations. Keep away from water sources.
Why does my heater turn off after a few minutes?
This may be due to the overheat protection feature. Ensure the heater has proper airflow (keep at least 3 feet clearance from objects). If it persists, check the filter for dust blockage.
What is the fan-only mode for?
The fan-only mode circulates air without heating. It can be used in summer to improve airflow or to cool a room.
How do I reset the heater after a safety shut-off?
Unplug the heater, wait 10–15 minutes for it to cool down, then plug it back in and turn it on. If it still shuts off, contact customer support.
Can I leave the heater on overnight?
While the heater has safety features, it is not recommended to leave it unattended for long periods. Always follow the manual's guidelines.
How do I replace the power cord?
If the cord is damaged, it must be replaced by a qualified technician. Do not attempt to repair it yourself. Contact Hubbell customer service for assistance.
What should I do if the heater makes a clicking noise?
Clicking sounds are normal as the thermostat cycles on/off. If the noise is loud or accompanied by sparks, unplug the heater and have it inspected.
User questions about J1630T4 Hubbell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual J1630T4 - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J1630T4 by Hubbell.
USER MANUAL J1630T4 Hubbell
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hubbell
Model : J1630T4
Category : Heating