Hubbell

J654T4 - Heating Hubbell - Free user manual and instructions

Find the device manual for free J654T4 Hubbell in PDF.

📄 40 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hubbell J654T4 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electric Heater
Brand Hubbell
Model J654T4
Heating Element Fan-forced convection
Power Consumption 1500 W (adjustable)
Voltage 120 V / 60 Hz
Heat Output 5120 BTU/h
Thermostat Adjustable, built-in
Safety Features Tip-over switch, overheat protection
Dimensions (W x H x D) 11 x 10 x 8 in
Weight 4.5 lbs
Material Steel body, plastic grille
Color White/Gray
Mounting Free-standing or wall-mounted
Noise Level Approx. 45 dB
Coverage Area Up to 150 sq ft
Energy Efficiency ETL certified
Warranty 1 year limited

Frequently Asked Questions - J654T4 Hubbell

How do I clean the Hubbell J654T4 heater?
Unplug the heater and let it cool completely. Use a soft damp cloth to wipe the exterior. Do not immerse in water. Vacuum the air intake grille periodically to remove dust.
Can the heater be used in a bathroom?
This model is not rated for bathroom use. It should be kept away from water and moisture to avoid electric shock.
What is the maximum coverage area?
The J654T4 can effectively heat rooms up to 150 square feet with proper insulation.
Does the heater have a thermostat?
Yes, it features an adjustable built-in thermostat to maintain your desired room temperature.
What safety features are included?
The heater includes a tip-over switch that shuts off if knocked over, and overheat protection that turns it off if internal temperatures exceed safe limits.
Can I mount the heater on a wall?
Yes, the J654T4 can be mounted on a wall using the provided bracket. Ensure the wall can support the weight and follow the installation instructions.
What is the power cord length?
The power cord is approximately 6 feet long. Do not use an extension cord unless recommended by the manufacturer.
How noisy is the heater during operation?
The fan produces a low noise level of about 45 dB, comparable to a quiet conversation.
What should I do if the heater stops working?
First, check the circuit breaker and ensure the unit is plugged in. If it has overheated, allow it to cool for 10 minutes before restarting. If issues persist, contact Hubbell customer support.
Where can I find replacement parts?
Replacement parts can be ordered through Hubbell's official website or authorized dealers. The model number J654T4 is required for correct parts.

User questions about J654T4 Hubbell

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual J654T4 - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J654T4 by Hubbell.

USER MANUAL J654T4 Hubbell

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hubbell

Model : J654T4

Category : Heating