DJC-119C-SCZ20-180 - Screwdriver Cotech - Free user manual and instructions
Find the device manual for free DJC-119C-SCZ20-180 Cotech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Model | DJC-119C-SCZ20-180 |
| Brand | Cotech |
| Voltage | 3.6 V |
| Battery Type | Lithium-Ion |
| Charging Time | Approximately 3-5 hours |
| Max Torque | 4 Nm |
| No-Load Speed | 0-180 rpm |
| Chuck Type | Hexagonal (1/4 inch) |
| Dimensions (L x W x H) | Approx. 200 x 50 x 50 mm |
| Weight | Approx. 0.35 kg (with battery) |
| Key Features | LED work light, forward/reverse switch, ergonomic grip |
| Maintenance | Clean with dry cloth; keep vents free of dust; store in dry place |
| Safety Features | Overload protection, automatic shut-off when overheated |
| Spare Parts Availability | Replacement batteries and chargers available via Cotech service |
| General Information | Designed for light-duty screwing tasks; suitable for DIY projects |
Frequently Asked Questions - DJC-119C-SCZ20-180 Cotech
How do I charge the screwdriver?
Connect the charger to the screwdriver's charging port and plug it into a power outlet. The LED indicator will show charging status. A full charge takes approximately 3-5 hours.
How do I change the direction of rotation?
Use the forward/reverse switch located above the trigger. Slide it to the left for forward (tightening) and to the right for reverse (loosening).
How do I insert a screwdriver bit?
Pull the chuck collar forward, insert the 1/4-inch hex bit into the chuck, then release the collar to lock it in place.
What should I do if the screwdriver stops working?
The tool may have overheated or the battery may be depleted. Allow it to cool down and recharge the battery. If the problem persists, contact Cotech support.
Can I use the screwdriver while it is charging?
No, the screwdriver cannot be used while connected to the charger. Unplug it before use.
How do I clean the screwdriver?
Wipe the exterior with a dry cloth. Do not use water or cleaning solvents. Ensure the battery is removed before cleaning.
What type of battery does the screwdriver use?
It uses a built-in lithium-ion battery. The battery is not user-replaceable; contact Cotech for service.
How do I know when the battery is fully charged?
The LED indicator on the charger shows red while charging and turns green (or off) when fully charged.
What is the torque of the screwdriver?
The maximum torque is 4 Nm, suitable for light household tasks like assembling furniture or driving small screws.
Where can I find spare parts?
Spare parts such as replacement batteries and chargers are available through Cotech service centers or authorized retailers. Check the official Cotech website for more information.
User questions about DJC-119C-SCZ20-180 Cotech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual DJC-119C-SCZ20-180 - Cotech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DJC-119C-SCZ20-180 by Cotech.
USER MANUAL DJC-119C-SCZ20-180 Cotech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cotech
Model : DJC-119C-SCZ20-180
Category : Screwdriver