Apocalypse AAK-5500.1D - Receiver Deaf Bonce - Free user manual and instructions
Find the device manual for free Apocalypse AAK-5500.1D Deaf Bonce in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Deaf Bonce |
| Model | Apocalypse AAK-5500.1D |
| Product Type | Car Audio Monoblock Amplifier |
| Amplifier Class | Class D |
| Power Output (RMS at 1 ohm) | 5500W x 1 |
| Power Output (RMS at 2 ohm) | 3500W x 1 |
| Power Output (RMS at 4 ohm) | 1800W x 1 |
| Frequency Response | 10 Hz – 250 Hz |
| Input Sensitivity | 0.2V – 6V |
| Low Pass Filter | Variable 40 Hz – 250 Hz |
| Subsonic Filter | Variable 10 Hz – 40 Hz |
| Bass Boost | 0 – 12 dB at 45 Hz |
| Dimensions (W x H x D) | 20.47 x 2.36 x 7.87 inches (520 x 60 x 200 mm) |
| Weight | 9.92 lbs (4.5 kg) |
| Power Supply Voltage | 10 – 16 V DC |
| Recommended Fuse | 4 x 40A (ANL type) |
| Protection Features | Thermal, Overload, Short Circuit, DC Offset |
| Input Connectors | RCA pair (LINE IN) |
| Speaker Output Connectors | Dual 8 AWG terminals |
| Remote Turn-On | 12 V trigger |
| Maintenance and Cleaning | Use dry cloth to clean; avoid liquids; ensure ventilation grills are unobstructed |
| Safety Instructions | Disconnect battery before installation; mount securely; keep away from moisture |
| Spare Parts and Repairability | Contact authorized service center; no user-serviceable parts inside |
| General Information | Designed for high-performance subwoofer systems; stable down to 1 ohm |
Frequently Asked Questions - Apocalypse AAK-5500.1D Deaf Bonce
What is the RMS power output of the Deaf Bonce Apocalypse AAK-5500.1D at 1 ohm?
The amplifier delivers 5500W RMS at 1 ohm.
What is the recommended fuse rating for this amplifier?
It requires 4 x 40A ANL fuses for proper protection.
Can this amplifier be bridged?
No, the AAK-5500.1D is a monoblock amplifier and cannot be bridged with another amplifier.
What impedance load is the amplifier stable to?
It is stable down to 1 ohm.
What are the dimensions of the AAK-5500.1D?
The dimensions are approximately 20.47 x 2.36 x 7.87 inches (520 x 60 x 200 mm).
How do I set the gain properly?
Use a multimeter or oscilloscope to match the amplifier's input sensitivity (0.2V – 6V) to your head unit's output. Set gain while playing a test tone at 40 Hz with volume at 3/4.
Does it have a subsonic filter?
Yes, it has a variable subsonic filter from 10 Hz to 40 Hz.
What kind of bass boost does it offer?
It features a 0-12 dB bass boost centered at 45 Hz.
Is the amplifier protected against overheating?
Yes, it includes thermal protection that will shut down the amplifier if it gets too hot.
What should I do if the amplifier goes into protection mode?
Check for short circuits, low impedance below 1 ohm, insufficient power supply voltage, or overheating. Ensure all connections are secure and within specifications.
User questions about Apocalypse AAK-5500.1D Deaf Bonce
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Apocalypse AAK-5500.1D - Deaf Bonce and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Apocalypse AAK-5500.1D by Deaf Bonce.
USER MANUAL Apocalypse AAK-5500.1D Deaf Bonce
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Deaf Bonce
Model : Apocalypse AAK-5500.1D
Category : Receiver