Bogen

DDU250 - Microphone Bogen - Free user manual and instructions

Find the device manual for free DDU250 Bogen in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Bogen DDU250 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Microphone
Brand Bogen
Model DDU250
Microphone Type Dynamic
Polar Pattern Cardioid
Frequency Response 50 Hz – 15 kHz
Impedance 600 ohms
Connector Type XLR (3-pin)
Cable Length 15 ft (4.6 m), attached
Weight 10.6 oz (300 g)
Dimensions (Length x Diameter) 7.1 in x 1.9 in (180 mm x 48 mm)
Housing Material Die-cast metal
Finish Matte black
On/Off Switch Yes, slide switch
Mounting Thread 5/8"-27
Included Accessories Windscreen, mic clip, storage bag
Application Public address, speech, vocals
Maintenance Wipe with dry cloth; store in dry place
Safety Precautions Avoid moisture and drops; do not open
Spare Parts Availability Replacement grille and windscreen available

Frequently Asked Questions - DDU250 Bogen

What type of microphone is the Bogen DDU250?
The Bogen DDU250 is a dynamic microphone with a cardioid polar pattern, ideal for spoken word and vocal applications in public address systems.
How do I connect the DDU250 to a mixer or amplifier?
Use a standard XLR cable (male to female) to connect the microphone's built-in XLR connector to a mixer or amplifier with a compatible input. The microphone has a 3-pin XLR output.
Can I use the DDU250 for recording or only for live sound?
While designed primarily for live public address, the DDU250 can be used for recording speech or vocals with a suitable audio interface. Its cardioid pattern helps reduce background noise.
How do I reduce feedback when using the DDU250?
Position the microphone close to your mouth (2-4 inches), point it away from speakers, and reduce gain on the mixer. The cardioid pattern rejects sound from the rear, minimizing feedback.
Is the DDU250 compatible with wireless systems?
No, the DDU250 is a wired microphone with a fixed cable. It cannot be used with wireless transmitters unless modified or used with an external XLR-to-wireless adapter.
What is the best way to clean the DDU250?
Wipe the metal body with a soft dry cloth. Remove the windscreen and wash it with mild soap and water, then air-dry completely before reattaching. Avoid getting moisture inside the grille.
Can I replace the cable if it gets damaged?
The cable is permanently attached and not user-replaceable. If damaged, contact Bogen support or a qualified technician for repair or replacement options.
What type of stand or mount does the DDU250 require?
The microphone has a standard 5/8-inch-27 threaded base, which fits most boom stands, desk stands, and mic clips. A compatible clip is included.
Does the DDU250 require phantom power?
No, dynamic microphones like the DDU250 do not require phantom power. They generate their own electrical signal via electromagnetic induction and work with any standard XLR input.
What is the frequency response range of the DDU250?
The frequency response is 50 Hz to 15 kHz, which covers the typical range of human speech and vocals with clear, natural reproduction.

User questions about DDU250 Bogen

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual DDU250 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DDU250 by Bogen.

USER MANUAL DDU250 Bogen

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bogen

Model : DDU250

Category : Microphone