DHP603-R - Pump EvoHeat - Free user manual and instructions
Find the device manual for free DHP603-R EvoHeat in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Heat pump |
| Model | DHP603-R |
| Dimensions (H x W x D) | Approx. 600 x 600 x 500 mm |
| Weight | Approx. 30 kg |
| Power supply | 230 V, 50 Hz, single phase |
| Power consumption | Approx. 1.5 kW |
| Heating capacity | Up to 6 kW |
| Refrigerant | R32 or R410A (check label) |
| Noise level | Approx. 45 dB(A) |
| Control interface | Digital control panel with display |
| Key functions | Heating, cooling, hot water production, defrost, timer, error diagnostics |
| Protection features | Overheat protection, frost protection, high pressure switch |
| Maintenance | Clean air filter monthly; professional inspection recommended annually |
| Installation | Outdoor installation on a flat, stable surface; clearance for airflow required |
| Spare parts availability | Contact authorized EvoHeat service centers |
| Warranty | Standard 2-year warranty (may vary by region) |
Frequently Asked Questions - DHP603-R EvoHeat
What does the EvoHeat DHP603-R do?
The DHP603-R is an air-source heat pump designed for heating, cooling, and domestic hot water production.
What is the power consumption of this pump?
Typical power consumption is around 1.5 kW during operation, but it varies with load.
Can I install it indoors?
No, it is intended for outdoor installation only, where airflow is sufficient.
How often should I clean the air filter?
The air filter should be cleaned monthly to maintain efficiency. Use a vacuum or water.
What refrigerant does it use?
It uses R32 or R410A refrigerant; check the unit label for confirmation.
Is the pump noisy?
Noise level is approximately 45 dB(A), which is comparable to a quiet conversation.
What should I do if the pump shows an error code?
Refer to the error code table in the manual. Common issues include low refrigerant or sensor faults. Contact support if unresolved.
Can I use it in cold climates?
Yes, it has frost protection and can operate down to approximately -15°C ambient temperature.
How do I reset the pump?
Turn off the power supply for 5 minutes, then turn it back on. This resets the control board.
Where can I find spare parts?
Spare parts are available through authorized EvoHeat service centers. Provide the model number.
User questions about DHP603-R EvoHeat
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual DHP603-R - EvoHeat and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DHP603-R by EvoHeat.