SAT 102 G2 WMB W - Loudspeaker LD Systems - Free user manual and instructions
Find the device manual for free SAT 102 G2 WMB W LD Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | LD Systems |
| Model | SAT 102 G2 WMB W |
| Speaker Type | Passive 2-way |
| Woofer Size | 10" (25.4 cm) |
| Tweeter Type | 1" compression driver |
| Power Handling (RMS) | 200 W |
| Power Handling (Peak) | 400 W |
| Impedance | 8 ohms |
| Sensitivity (1W/1m) | 96 dB |
| Frequency Response | 60 Hz - 20 kHz |
| Dispersion (H x V) | 100° x 70° |
| Dimensions (W x H x D) | 300 x 520 x 340 mm |
| Weight | 12 kg |
| Color | White |
| Mounting Bracket Supplied | Wall mount bracket (WMB) |
| Recommended Amplifier Power | 200-400 W into 8 ohms |
| Connector Type | Speakon or binding posts |
| Construction Material | MDF with vinyl coating |
| Grille | Perforated metal |
| Application | Installation, foreground music, speech |
Frequently Asked Questions - SAT 102 G2 WMB W LD Systems
How do I connect the SAT 102 G2 WMB W to an amplifier?
Use a Speakon or binding post connector. Ensure the amplifier is turned off and match the impedance (8 ohms). Connect the positive and negative terminals accordingly.
What is the recommended amplifier power for this speaker?
An amplifier with 200-400 watts RMS per channel into 8 ohms is recommended. Ensure the amplifier's output does not exceed the speaker's peak power handling (400 W) to avoid damage.
Can I use this speaker outdoors?
The SAT 102 G2 WMB W is designed for indoor use. If used outdoors, protect it from moisture and direct sunlight. It is not weatherproof.
How should I clean the speaker?
Clean the exterior with a dry or slightly damp cloth. Do not use abrasive cleaners. Keep the grille dust-free with a soft brush or vacuum.
What is the wall mount bracket included?
The wall mount bracket (WMB) allows secure mounting on walls. It supports the weight of the speaker and provides tilt/swivel for optimal coverage.
Can I daisy-chain multiple speakers?
Yes, but ensure the total impedance does not drop below the amplifier's minimum rating. For two 8-ohm speakers, connect them in parallel for a 4-ohm load.
What is the frequency response of the SAT 102 G2?
The frequency response is 60 Hz to 20 kHz, making it suitable for full-range audio reproduction, including vocals and instrumentals.
Is the speaker magnetically shielded?
No, this speaker is not magnetically shielded. Keep it away from CRT monitors and magnetic media.
What warranty does LD Systems offer?
LD Systems typically offers a 2-year warranty. Check your local distributor for specific terms. Retain your purchase receipt.
Can I use a subwoofer with this speaker?
Yes, for extended low-end, pair with a subwoofer using a crossover. The SAT 102 G2 can be used as satellite speaker in a sub-sat system.
User questions about SAT 102 G2 WMB W LD Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SAT 102 G2 WMB W - LD Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAT 102 G2 WMB W by LD Systems.
USER MANUAL SAT 102 G2 WMB W LD Systems
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LD Systems
Model : SAT 102 G2 WMB W
Category : Loudspeaker