Fluance

AB40 - Uncategorized Fluance - Free user manual and instructions

Find the device manual for free AB40 Fluance in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Fluance AB40 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeWireless Speaker System
BrandFluance
ModelAB40
Dimensions (H x W x D)Approx. 30 cm x 20 cm x 25 cm
WeightApprox. 3.5 kg per speaker
Power SupplyAC 100-240V, 50/60Hz
Wireless ConnectivityBluetooth 5.0 with aptX
Driver Configuration2-way: 1" tweeter, 5" woofer
Frequency Response50Hz - 20kHz
Input Impedance8 ohms
Supported Audio FormatsMP3, WAV, FLAC, AAC
Remote ControlIncluded (IR)
Enclosure TypeBass-reflex (ported)
Grille MaterialRemovable fabric grille
Standby Power Consumption<0.5W
Operating Temperature0°C to 40°C
MaintenanceWipe with dry cloth; avoid liquids
Safety CertificationsCE, FCC, RoHS
Spare Parts AvailabilityContact Fluance support
Warranty2 years limited

Frequently Asked Questions - AB40 Fluance

How do I pair the speakers with a Bluetooth device?
Press the Bluetooth button on the speaker or remote until the indicator flashes. On your device, select 'Fluance AB40' from the Bluetooth list. If prompted, enter '0000' as the PIN.
Can I use the speakers without the remote control?
Yes, the speakers have manual controls on the front panel for power, volume, and input selection. However, the remote provides convenient access to all functions.
What is the maximum Bluetooth range?
The Bluetooth range is approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.
How do I clean the speaker grilles?
Remove the grille gently. Use a soft brush or vacuum with a low suction setting to remove dust. For stains, lightly dampen a cloth with water and mild soap, then wipe and air dry completely before reattaching.
Can I connect multiple speakers together?
The AB40 model does not support daisy-chaining or multi-room pairing without additional hardware. Each speaker operates independently.
What should I do if the speaker does not turn on?
Check the power cable connection and ensure the power outlet is working. Try a different outlet. If the issue persists, contact Fluance support for assistance.
Is there a standby mode?
Yes, the speaker automatically enters standby after 15 minutes of inactivity. Press the power button or use the remote to wake it.
How can I reset the speaker to factory settings?
With the speaker on, press and hold the Bluetooth button for 10 seconds until the indicator blinks rapidly. This clears paired devices and resets settings.
Does the speaker have a battery for portable use?
No, the AB40 is designed for AC power only and does not include a built-in battery. It must be plugged into an outlet.
Where can I find the user manual for download?
The user manual is available on the notice-facile.com website under the Fluance AB40 product page. You can download it in PDF format for free.

User questions about AB40 Fluance

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual AB40 - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AB40 by Fluance.

USER MANUAL AB40 Fluance

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Fluance

Model : AB40

Category : Uncategorized