Fi70 - Hi-Fi System Fluance - Free user manual and instructions
Find the device manual for free Fi70 Fluance in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Bookshelf Speaker System |
| Model | Fi70 |
| Brand | Fluance |
| System Configuration | 2.0 Stereo (Passive + Active Speaker) |
| Amplifier Type | Class D |
| Total Power Output | 200W RMS |
| Woofer Size | 6.5 inches |
| Woofer Material | Glass Fiber |
| Tweeter Size | 1 inch |
| Tweeter Type | Ferrofluid Cooled Silk Dome |
| Frequency Response | 35Hz - 20kHz |
| Bluetooth Version | 5.0 with aptX |
| Inputs | Optical, RCA (AUX), USB (Service only) |
| Outputs | Subwoofer Pre-out (RCA) |
| Remote Control | Yes (included) |
| Dimensions (Active Speaker, W x D x H) | 9.8 x 11.8 x 15.5 inches |
| Dimensions (Passive Speaker, W x D x H) | 9.8 x 11.8 x 15.5 inches |
| Weight (Active Speaker) | 23.8 lbs |
| Weight (Passive Speaker) | 19.4 lbs |
| Enclosure Type | Bass Reflex (Rear Ported) |
| Power Voltage | 110-240V, 50/60Hz (Auto-Switching) |
| Safety Certifications | UL, CE, FCC |
| Warranty | 1 Year (Parts & Labor) |
Frequently Asked Questions - Fi70 Fluance
How do I connect my phone to the Fi70 via Bluetooth?
Turn on the Fi70 system. Press the Bluetooth button on the remote or front panel until the LED blinks blue. On your phone, enable Bluetooth and select 'Fluance Fi70' from the list. Once paired, the LED turns solid blue.
Can I use the Fi70 with a TV?
Yes, you can connect the Fi70 to your TV using the optical input (recommended) or RCA AUX input. Use the included optical cable or a 3.5mm-to-RCA cable. Ensure the TV audio output is set to PCM.
How do I reset the Fi70 to factory settings?
Press and hold the Source button on the active speaker for 10 seconds. The system will power off and reset. All paired devices will be cleared.
What is the maximum power handling of the Fi70?
The Fi70 has a total RMS power output of 200W (100W per channel). It is a powered system so no external amplifier is needed.
How do I clean the speaker grilles?
Use a soft, dry microfiber cloth to gently dust the grilles. Do not use any liquids or cleaning agents. For deeper cleaning, remove the grilles by gently pulling them off and vacuum with a brush attachment.
Can I add a subwoofer to the Fi70?
Yes, the Fi70 has a subwoofer pre-out (RCA) on the active speaker. Connect an powered subwoofer using a standard RCA cable. The crossover is managed by the subwoofer itself.
Why is there no sound from one speaker?
Check the speaker wire connection between the active and passive speaker. Ensure the wire is fully inserted in the spring clips. Also verify that the source is outputting stereo sound. Try swapping the left and right channels.
What are the dimensions of the Fi70 speakers?
Each speaker measures 9.8 x 11.8 x 15.5 inches (W x D x H). The active speaker weighs 23.8 lbs (10.8 kg) and the passive weighs 19.4 lbs (8.8 kg).
Does the Fi70 support aptX?
Yes, the built-in Bluetooth 5.0 supports aptX and AAC codecs for high-quality wireless audio streaming.
How do I replace the remote control battery?
Slide off the back cover of the remote. Replace the CR2025 coin cell battery with the positive (+) side facing up. Slide the cover back until it clicks.
User questions about Fi70 Fluance
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual Fi70 - Fluance and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fi70 by Fluance.
USER MANUAL Fi70 Fluance
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fluance
Model : Fi70
Category : Hi-Fi System