BOAC-1 - Water pump Truper - Free user manual and instructions
Find the device manual for free BOAC-1 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Centrifugal Water Pump |
| Model | BOAC-1 |
| Brand | Truper |
| Power | 1 HP (746 W) |
| Voltage | 110-120 V / 60 Hz |
| Max Flow Rate | 30 L/min (7.9 GPM) |
| Max Head | 30 m (98 ft) |
| Inlet/Outlet Size | 1 inch (25.4 mm) NPT |
| Material | Cast Iron Body, Bronze Impeller |
| Weight | 12.5 kg (27.6 lbs) |
| Dimensions (L x W x H) | 40 x 20 x 25 cm (15.7 x 7.9 x 9.8 in) |
| Protection Class | IP44 |
| Thermal Protection | Built-in overload protector |
| Minimum Liquid Temperature | 5°C (41°F) |
| Maximum Liquid Temperature | 35°C (95°F) |
| Suction Lift | 8 m (26 ft) maximum |
| Maintenance | Regular cleaning of strainer; check seals annually |
| Safety Features | Thermal overload switch, IP44 weatherproof |
| Spare Parts Availability | Impeller, seals, capacitor available through Truper distributors |
| Application | Clean water transfer, irrigation, drainage |
Frequently Asked Questions - BOAC-1 Truper
How do I prime the Truper BOAC-1 water pump?
Remove the priming plug on top of the pump, fill the pump casing with water until it overflows, then replace the plug securely before starting the motor. This ensures the pump is primed for operation.
What is the maximum suction lift of the BOAC-1?
The maximum suction lift is 8 meters (26 feet). For optimal performance, keep the suction line as short and straight as possible.
Can the BOAC-1 pump be used for hot water?
No, the maximum liquid temperature is 35°C (95°F). Do not use the pump with hot water or flammable liquids.
How often should I clean the strainer?
Clean the strainer every 2-3 months or whenever you notice a drop in flow rate. Remove debris by rinsing with clean water.
What type of oil does the BOAC-1 require?
The pump is factory lubricated and does not require additional oil. The motor bearings are sealed and maintenance-free.
Why is my pump running but not pumping water?
Check if the pump is primed (filled with water). Also ensure the suction line is not blocked or leaking, and that the foot valve is functioning.
What is the warranty period for the Truper BOAC-1?
Truper offers a 1-year limited warranty against manufacturing defects. Register your product online for warranty confirmation.
Can I install the pump outdoors?
Yes, the pump has IP44 protection, making it splash-proof. However, protect it from direct rain and extreme weather for longer life.
How do I replace the impeller?
Disconnect power, remove the pump housing bolts, and pull out the old impeller. Install the new impeller ensuring correct orientation, then reassemble. Torque bolts to specifications in the manual.
What size pipe should I use?
Use 1-inch (25.4 mm) NPT threaded pipes or hoses for both inlet and outlet. Larger pipes may reduce flow velocity but increase friction losses.
User questions about BOAC-1 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual BOAC-1 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BOAC-1 by Truper.
USER MANUAL BOAC-1 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : BOAC-1
Category : Water pump