NAS-3058 - Loudspeaker Naxa - Free user manual and instructions
Find the device manual for free NAS-3058 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Naxa |
| Model | NAS-3058 |
| Dimensions (approx.) | 7.5 x 7.5 x 10 cm |
| Weight | 280 g |
| Power Supply | Built-in rechargeable battery via USB (5V DC) |
| Battery Life | Up to 6 hours at moderate volume |
| Wireless Connectivity | Bluetooth 5.0 |
| Additional Inputs | AUX 3.5mm, Micro SD card slot, USB port for music playback |
| Radio Function | FM tuner with built-in antenna |
| Speaker Configuration | Single full-range driver |
| Rated Power | 5W RMS |
| Frequency Range | 80 Hz – 20 kHz |
| Controls | Buttons for power, volume, track skip, mode, and play/pause |
| Built-in Microphone | Yes, for hands-free calling |
| Included Accessories | USB charging cable, AUX cable, user manual |
| Maintenance | Clean with a soft, dry cloth; avoid harsh chemicals |
| Safety Warnings | Do not expose to water or extreme temperatures; keep away from children |
| Spare Parts Availability | Contact Naxa customer support for replacement parts |
| Repairability | Not user-serviceable; seek professional repair if needed |
| General Information | Compatible with most Bluetooth-enabled devices; supports MP3/WMA audio files |
Frequently Asked Questions - NAS-3058 Naxa
How do I pair the NAS-3058 with my phone?
Turn on the speaker and set it to Bluetooth mode (press the mode button). On your phone, enable Bluetooth and select NAS-3058 from the list of available devices. If prompted for a PIN, enter 0000.
Can I use the speaker while it is charging?
Yes, the NAS-3058 can be used while connected to a USB power source. However, avoid using it at maximum volume to prevent overheating.
How long does the battery take to fully charge?
Approximately 2-3 hours when using a standard 5V/1A USB charger. A red LED indicates charging; it turns off when fully charged.
Why is the sound distorted at high volumes?
Distortion at high volumes is normal for compact speakers. Reduce the volume from your source device and increase the speaker volume for cleaner sound.
How do I reset the speaker?
Turn off the speaker, then press and hold the Power button for 10 seconds until the LED flashes. Release and turn on again.
Can I connect two speakers together?
The NAS-3058 does not support stereo pairing or daisy-chaining. Each speaker operates independently.
What file formats are supported via USB/SD card?
The speaker plays MP3 and WMA audio files stored on USB drives or SD cards formatted as FAT32.
How do I use the FM radio function?
Press the mode button until the speaker enters FM mode. To auto-scan channels, press and hold the Play/Pause button. Stations are saved automatically.
Is the speaker waterproof?
No, the NAS-3058 is not waterproof. Keep it away from liquids and moisture to avoid damage.
The speaker does not turn on. What should I do?
First, charge the speaker for at least 2 hours. If it still doesn't turn on, try a different USB cable and adapter. If the issue persists, contact Naxa support.
User questions about NAS-3058 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual NAS-3058 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NAS-3058 by Naxa.
USER MANUAL NAS-3058 Naxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Naxa
Model : NAS-3058
Category : Loudspeaker