Sound Pro NDS-1233 - Loudspeaker Naxa - Free user manual and instructions
Find the device manual for free Sound Pro NDS-1233 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Loudspeaker |
| Model | Sound Pro NDS-1233 |
| Brand | Naxa |
| Dimensions | Approx. 7.5 x 3.5 x 3.5 inches (190 x 90 x 90 mm) |
| Weight | Approx. 1.1 lbs (500 g) |
| Power Source | Built-in rechargeable lithium-ion battery, DC 5V via Micro USB |
| Battery Life | Up to 6 hours at moderate volume |
| Charging Time | Approx. 2-3 hours |
| Bluetooth Version | Bluetooth 5.0 |
| Wireless Range | Up to 33 feet (10 meters) |
| Audio Input | Bluetooth, AUX 3.5mm, Micro SD card, USB flash drive |
| Speaker Power Output | 10W RMS |
| Speaker Driver | 2 x 2.5 inches full-range drivers |
| Frequency Response | 80 Hz - 18 kHz |
| Impedance | 4 Ohms |
| Controls | Power, Volume +/-, Play/Pause, Next/Previous, Mode, LED indicator |
| Features | Built-in microphone for hands-free calling, TWS pairing, RGB LED lights |
| Waterproof Rating | IPX5 (splash resistant) |
| Cleaning | Wipe with a soft, dry cloth. Do not use abrasive cleaners. |
| Safety | Do not expose to extreme temperatures or immerse in water. Discontinue use if damaged. |
| Spare Parts / Repairability | Contact Naxa support for service. No user-serviceable parts inside. |
Frequently Asked Questions - Sound Pro NDS-1233 Naxa
How do I pair the speaker with my phone via Bluetooth?
Turn on the speaker and put it in pairing mode by pressing the Power or Bluetooth button until the LED flashes. On your phone, search for devices and select 'Naxa Sound Pro NDS-1233'.
How long does the battery last on a full charge?
The battery can last up to 6 hours at moderate volume. Charging takes about 2-3 hours via the included Micro USB cable.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging, but it may take longer to fully charge.
Does the speaker have a built-in microphone for hands-free calling?
Yes, the Sound Pro NDS-1233 features a built-in microphone that allows you to answer calls hands-free when connected via Bluetooth.
How do I reset the speaker to factory settings?
To reset, turn off the speaker, then press and hold the Volume + and Power buttons together for about 5 seconds until the LED flashes rapidly.
Is the speaker waterproof?
The speaker has an IPX5 rating, meaning it is splash-resistant but not fully waterproof. Avoid submerging it in water.
How can I play music from a micro SD card or USB drive?
Insert the micro SD card or USB drive into the corresponding slot. Press the Mode button to switch to SD/USB mode, and playback will start automatically.
Can I connect two speakers together for stereo sound?
Yes, the speaker supports TWS (True Wireless Stereo) pairing. Pair one speaker to your phone, then press the TWS button on both speakers to link them.
What should I do if the speaker does not turn on?
First, charge the speaker for at least 2 hours. If it still does not turn on, try a different charging cable. If the issue persists, contact Naxa support.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners. Keep the ports dry and free of debris.
User questions about Sound Pro NDS-1233 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Sound Pro NDS-1233 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sound Pro NDS-1233 by Naxa.
USER MANUAL Sound Pro NDS-1233 Naxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Naxa
Model : Sound Pro NDS-1233
Category : Loudspeaker