Sound Pro NDS-1235 - Loudspeaker Naxa - Free user manual and instructions
Find the device manual for free Sound Pro NDS-1235 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Naxa |
| Model | Sound Pro NDS-1235 |
| Dimensions (approx.) | 10.2 x 6.3 x 4.7 inches (26 x 16 x 12 cm) |
| Weight | 2.65 lbs (1.2 kg) |
| Power Source | Rechargeable lithium-ion battery (2000 mAh) |
| Battery Life | Up to 6 hours at medium volume |
| Charging | USB-C charging cable (included) |
| Bluetooth Version | 5.0 |
| Wireless Range | 33 feet (10 meters) |
| Audio Inputs | Bluetooth, AUX 3.5mm, USB-A, microSD card slot |
| FM Radio | Built-in FM radio with auto scan |
| Speaker Driver | 5.25 inch woofer, 1.5 inch tweeter |
| Output Power | 30W RMS |
| Frequency Response | 60 Hz – 20 kHz |
| Waterproof Rating | IPX5 (splash resistant) |
| Controls | Buttons on top: Power, Volume, Play/Pause, Mode, Next/Previous, EQ |
| Microphone | Built-in for hands-free calling |
| Accessories Included | USB charging cable, AUX cable, user manual |
| Safety Precautions | Do not expose to extreme temperatures or moisture above IPX5 rating; keep away from heat sources; use only provided charger; do not disassemble. |
| Maintenance | Clean with a soft dry cloth; avoid abrasive cleaners; store in a cool dry place; charge battery every 3 months if not in use. |
| Spare Parts / Repairability | Contact Naxa support or authorized service centers for battery or driver replacement; user replaceable parts: none. |
| General Information | Full user manual available at notice-facile.com; for questions, refer to FAQ below or contact Naxa customer service. |
Frequently Asked Questions - Sound Pro NDS-1235 Naxa
How do I pair my phone with the Naxa Sound Pro NDS-1235 via Bluetooth?
Turn on the speaker by pressing the power button. Press the Mode button until you see the Bluetooth indicator flashing. On your phone, enable Bluetooth and search for devices. Select 'Naxa Sound Pro NDS-1235' from the list. If prompted, enter the PIN '0000' or confirm pairing. Once connected, the indicator will become steady.
How do I charge the speaker?
Use the included USB-C charging cable. Connect the USB end to a USB power adapter (5V/2A recommended) or a computer USB port, and the other end to the speaker's charging port. The LED indicator will glow red while charging and turn off or change color when fully charged. Charging time is approximately 3-4 hours.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is plugged in and charging. However, for optimal battery lifespan, it is recommended to fully charge before first use and avoid constant charging while playing at high volume.
How do I reset the speaker to factory settings?
To reset the Naxa Sound Pro NDS-1235, press and hold the Play/Pause button and the Mode button simultaneously for about 5 seconds until the speaker powers off. Then turn it back on. All paired devices will be cleared, and settings will return to default.
Is the speaker waterproof?
The speaker has an IPX5 waterproof rating, meaning it can withstand splashes of water from any direction. It is not designed to be submerged in water or exposed to heavy rain. Avoid using it near pools or in the shower.
How do I listen to FM radio?
Press the Mode button repeatedly until the display shows 'FM' or radio mode. Then press and hold the Play/Pause button to auto-scan and store available stations. Use the Next/Previous buttons to cycle through saved stations. For better reception, extend the charging cable which acts as an antenna.
Can I use a microSD card or USB drive to play music?
Yes, insert a microSD card or USB drive (up to 32GB, FAT32 format) into the respective slots. The speaker will automatically detect and play audio files (MP3, WMA, etc.). Use the Next/Previous buttons to navigate tracks and Play/Pause to control playback.
What should I do if the speaker does not turn on?
First, ensure the speaker is charged by connecting the charging cable. If the LED does not light up, try a different USB cable or power adapter. If still no response, press and hold the Power button for 10 seconds to perform a hard reset. If the issue persists, contact Naxa customer support.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners. For the speaker grille, gently brush with a soft-bristled brush to remove dust. Ensure the charging port is clean and dry before charging.
What is the warranty for the Naxa Sound Pro NDS-1235?
Naxa typically offers a 1-year limited warranty against manufacturing defects. Keep your purchase receipt as proof. For warranty claims, contact Naxa support or the retailer where purchased. The warranty does not cover damage caused by misuse, water damage beyond IPX5 rating, or unauthorized repairs.
User questions about Sound Pro NDS-1235 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Sound Pro NDS-1235 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sound Pro NDS-1235 by Naxa.
USER MANUAL Sound Pro NDS-1235 Naxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Naxa
Model : Sound Pro NDS-1235
Category : Loudspeaker