AEG

T7DBG843 - Tumble dryer AEG - Free user manual and instructions

Find the device manual for free T7DBG843 AEG in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AEG T7DBG843 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeTumble Dryer
BrandAEG
ModelT7DBG843
Capacity7 kg
Dimensions (H x W x D)85 cm x 60 cm x 60 cm
Weight44 kg
Energy Efficiency ClassA++
Annual Energy Consumption235 kWh
Drum Volume118 L
Drying ProgramsCotton, Synthetics, Delicates, Wool, Shirts, Bed Linen, Sport, Quick 40 min
Heat SourceHeat Pump
Noise Level66 dB(A)
Water Tank Capacity4.5 L
Filter Type2-layer filter (fluff filter)
Condenser CleaningAutomatic condenser cleaning with 3-step process
Reverse TumblingYes
Anti-Crease FunctionYes, 120 min
Delay StartUp to 24 hours
Control TypeElectronic, LED display
Power Supply230 V / 50 Hz
Power Consumption (max)900 W
Warranty2 years

Frequently Asked Questions - T7DBG843 AEG

How do I clean the fluff filter?
Open the door, pull out the filter located at the bottom of the door opening, remove the fluff from both layers, and rinse under running water if needed. Dry thoroughly before reinserting. Clean after every cycle for optimal performance.
Why is the drying time longer than expected?
Longer drying times can be due to a clogged fluff filter, overloaded drum, or selected program. Ensure the filter is clean and the load does not exceed 7 kg. Also, high humidity in the room can affect drying.
Can I install the dryer on top of a washing machine?
Yes, the AEG T7DBG843 can be placed on top of a washing machine using a stacking kit (sold separately). Ensure the washing machine has a solid top and the dryer is securely fastened.
What does the 'Automatic Condenser Cleaning' do?
This feature automatically cleans the condenser during the cycle by flushing it with water. It removes lint and ensures consistent drying performance. No manual cleaning is required for up to 3 months.
How do I empty the water tank?
Pull out the water tank drawer located at the bottom left of the dryer, pour the water into a sink, and slide the drawer back in. The tank has a capacity of 4.5 L. Empty after each cycle if not connected to a drain.
What should I do if the dryer stops and shows an error code?
Refer to the manual's troubleshooting section. Common codes: E40 = filter blockage, E41 = water tank full. Reset by turning the dryer off and on. If persistent, contact AEG customer service.
Is the dryer suitable for delicate fabrics like wool?
Yes, the T7DBG843 has a Wool drying program that uses low heat and gentle tumbling. However, always check the care label of your garment. 1 kg max load for wool.
How do I use the delay start function?
Select your program and then press the start delay button to set the desired delay in hours (up to 24). Press start. The dryer will begin at the set time. Useful to take advantage of off-peak electricity rates.
What is the energy consumption in standby?
In standby mode, the dryer consumes less than 0.1 W. To save energy, the display turns off automatically after a few minutes of inactivity.
Can I open the door during a cycle?
Yes, press the door button to pause the cycle. The drum stops and you can add or remove items. Close the door and press start to resume. Safety feature prevents hot air from escaping.

User questions about T7DBG843 AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Tumble dryer in PDF format for free! Find your manual T7DBG843 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T7DBG843 by AEG.

USER MANUAL T7DBG843 AEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : T7DBG843

Category : Tumble dryer