D5180HD - Projector VIVITEK - Free user manual and instructions
Find the device manual for free D5180HD VIVITEK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | DLP Projector |
| Resolution | 1920 x 1080 (Full HD) |
| Brightness | 3500 ANSI Lumens |
| Contrast Ratio | 15000:1 |
| Aspect Ratio | 16:9 (Native) |
| Lamp Life | 5000 hours (Normal) / 6000 hours (Eco) |
| Projection Size | 30" - 300" |
| Throw Ratio | 1.48 - 1.79:1 |
| Zoom | 1.2x Manual |
| Keystone Correction | Vertical ±30° |
| Inputs | HDMI 1.4a, VGA, Composite, S-Video, Audio 3.5mm |
| Outputs | VGA, Audio 3.5mm |
| Speaker | 2W Mono |
| Noise Level | 32 dB (Normal) / 28 dB (Eco) |
| Power Consumption | 240W (Normal) / <0.5W (Standby) |
| Dimensions (W x D x H) | 320 x 244 x 108 mm |
| Weight | 2.9 kg |
| Lamp Type | 190W UHP |
| 3D Support | Yes (HDMI 1.4a 3D) |
| Warranty | 2 years (lamp 6 months or 1000 hours) |
Frequently Asked Questions - D5180HD VIVITEK
How do I connect my laptop to the Vivitek D5180HD projector?
Use an HDMI or VGA cable. Connect one end to your laptop and the other to the corresponding input on the projector. Then select the correct input source using the remote or projector buttons.
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal screen, the projector should be placed approximately 3.3 to 4.0 meters away, depending on the zoom setting.
How do I adjust the keystone correction?
Press the Keystone button on the remote or use the on-screen menu to adjust vertical keystone correction up to ±30 degrees to square the image.
How often should I replace the lamp?
The lamp lasts up to 5000 hours in normal mode and 6000 hours in eco mode. Replace it when the image becomes dim or the lamp indicator lights up.
Can I view 3D content on the D5180HD?
Yes, it supports HDMI 1.4a 3D. You need compatible 3D glasses (DLP Link) and a 3D source (Blu-ray player, etc.). Enable 3D in the menu.
How do I clean the dust filter?
Turn off the projector and unplug it. Remove the filter cover (usually on the side), take out the filter, and gently vacuum or wash it with water. Let it dry completely before reinstalling.
My projector shows no image but the LED is on. What should I do?
Check if the lens cap is removed, ensure the correct input source is selected, and verify the cable connections. Also check if the lamp needs replacement.
What is the maximum screen size?
The projector can display an image from 30 inches to 300 inches. For optimal brightness, a screen size between 80 and 120 inches is recommended.
Can I mount the projector on the ceiling?
Yes, the D5180HD is compatible with standard ceiling mounts. Ensure the mount supports the weight (2.9 kg) and use the three mounting holes on the bottom.
How do I reset the lamp timer?
After replacing the lamp, go to the Settings menu, select 'Lamp Settings' or 'Lamp Hours', then press and hold 'Enter' for 3 seconds to reset the timer.
User questions about D5180HD VIVITEK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual D5180HD - VIVITEK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D5180HD by VIVITEK.
USER MANUAL D5180HD VIVITEK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VIVITEK
Model : D5180HD
Category : Projector