AV2XS - Uncategorized Adj - Free user manual and instructions
Find the device manual for free AV2XS Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Light Effect |
| Light Source | 30 x 3W RGBW LEDs |
| Voltage | 100-240VAC, 50/60Hz |
| Power Consumption | 120W |
| Dimensions (L x W x H) | 40 x 10 x 15 cm |
| Weight | 2.5 kg |
| DMX Channels | 4/6/9/11 channel modes |
| Control Modes | DMX512, Master/Slave, Sound Active, Auto |
| Data Connectors | 3-pin XLR (In/Out) |
| Power Connector | IEC Power In/Out |
| Housing Material | Aluminum & Plastic |
| Protection Rating | IP20 (Indoor use) |
| Cooling | Convection, no fan |
| Operating Temperature | -10°C to 45°C |
| Fuse | 2A 250V 5x20mm |
| Included Accessories | Power cord, DMX cable, mounting bracket |
| Maintenance | Clean exterior with dry cloth; ensure vents are clear |
| Safety | Use grounded outlets; do not expose to rain or moisture |
| Repairability | Replaceable fuse and power supply; contact service for LED board |
| General Information | Compact RGBW effect light for DJs and events |
Frequently Asked Questions - AV2XS Adj
How do I set the DMX address on the AV2XS?
Press the MENU button until the display shows d001, then use the UP and DOWN buttons to select the desired address. Press ENTER to confirm.
How do I use sound active mode?
Press the MENU button until SoUn appears, then press ENTER. The light will respond to music via the built-in microphone.
What is master/slave mode?
In master/slave mode, one unit (master) controls others (slaves) via DMX cable. Set the master to auto or sound mode, and slaves to SLAV in settings.
How do I clean the light?
Use a soft dry cloth to wipe the housing. Do not use solvents or liquids. Ensure the fixture is unplugged before cleaning.
How do I replace the fuse?
Disconnect power. Open the fuse holder next to the power input with a flathead screwdriver. Replace with a 2A 250V 5x20mm fuse of the same type.
What is the warranty period?
Adj products typically come with a 2-year limited warranty. Check the included warranty card or contact support for details.
Can I connect multiple AV2XS units together?
Yes, you can daisy-chain power and DMX. Connect IEC Power Out to the next unit, and DMX Out to the next unit's DMX In. Ensure total power draw does not exceed 10 units.
What accessories are included?
The package includes a power cord, a 1m DMX cable, a mounting bracket with screws, and a user manual.
How do I reset the light to factory settings?
Press and hold the MENU button for 5 seconds until the display shows rESt. Press ENTER to confirm reset.
How do I update the firmware?
Firmware updates are done via the DMX input using a firmware update tool (sold separately). Contact Adj technical support for instructions.
User questions about AV2XS Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AV2XS - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AV2XS by Adj.
USER MANUAL AV2XS Adj
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adj
Model : AV2XS
Category : Uncategorized