ElectraPix Bar 16 Pak - Uncategorized Adj - Free user manual and instructions
Find the device manual for free ElectraPix Bar 16 Pak Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Pixel Bar (16 units pack) |
| Brand | ADJ (American DJ) |
| Model | ElectraPix Bar 16 Pak |
| Number of Units in Pack | 16 |
| Dimensions (per unit) | 1016 x 76 x 152 mm (40" x 3" x 6") |
| Weight (per unit) | 2.4 kg (5.3 lbs) |
| Total Pack Weight | 38.4 kg (84.6 lbs) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption (per unit) | 32W |
| Light Source | 16 x 1W RGB LEDs |
| Pixel Count (per unit) | 16 individually addressable pixels |
| DMX Channels | 48 (16 pixels x 3 channels) |
| DMX Connectors | 3-pin XLR in and out |
| Control Modes | DMX512, Standalone, Sound Active, Master/Slave |
| Housing Material | Aluminum and high-impact plastic |
| Cooling System | Fanless convection cooling |
| Protection Rating | Indoor use (IP20) |
| Certification | CE, RoHS |
| Cleaning Instructions | Wipe with a soft dry cloth; avoid solvents |
| Replacement Parts Available | LED modules, control board, power supply |
| Included Accessories | Mounting brackets, power cords, DMX cables |
Frequently Asked Questions - ElectraPix Bar 16 Pak Adj
How do I connect multiple ElectraPix Bar units together?
Use DMX cables to link the 3-pin XLR output of one unit to the input of the next. Set the first unit as master and the others as slave to run synchronized programs.
What is the DMX channel configuration for the ElectraPix Bar 16 Pak?
Each unit uses 48 DMX channels when in 16-pixel RGB mode. Channels 1-3 control pixel 1 (red, green, blue), channels 4-6 control pixel 2, and so on. Refer to the manual for alternative channel modes.
Can I use the ElectraPix Bar outdoors?
No, the ElectraPix Bar has an IP20 rating, meaning it is intended for indoor use only. Avoid exposure to rain, moisture, or extreme dust.
How do I clean the LED bars safely?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the housing and lenses. Do not use solvents or abrasive cleaners, as they may damage the finish.
What power requirements are needed for the ElectraPix Bar 16 Pak?
Each unit operates on AC 100-240V, 50/60Hz. The power consumption is 32W per unit, so for 16 units you should allow a total of 512W. Use a dedicated circuit to avoid overload.
Does the ElectraPix Bar support sound-activated programs?
Yes, in standalone mode the fixture can run sound-active programs. Its built-in microphone reacts to music BPM and automatically changes colors and patterns.
How do I reset the fixture to factory defaults?
Navigate the menu buttons to the 'Reset' option and press enter. Alternatively, cycle power while holding the Mode button for 3 seconds. This restores all settings.
Are replacement parts available for the ElectraPix Bar?
Yes, LED modules and control boards can be ordered from ADJ service centers. The power supply is also replaceable. Always have repairs done by qualified technicians.
Can I operate the ElectraPix Bar in standalone mode without a controller?
Absolutely. Press the Mode button until 'SND' appears to enter sound-active mode. You can also choose built-in automatic programs that cycle through colors without external control.
What is the best way to transport the ElectraPix Bar pack?
Use the original packing case or a road case with foam dividers. Keep the units in a dry, dust-free environment and avoid stacking heavy objects on top.
User questions about ElectraPix Bar 16 Pak Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ElectraPix Bar 16 Pak - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ElectraPix Bar 16 Pak by Adj.