ElectraPix Par 7 - Uncategorized Adj - Free user manual and instructions
Find the device manual for free ElectraPix Par 7 Adj in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can Light |
| Model | ElectraPix Par 7 |
| Brand | Adj |
| Light Source | 7 x 12W RGBWA+UV LEDs |
| Beam Angle | 25 degrees |
| Power Consumption | 120W max |
| Input Voltage | AC 100-240V, 50/60Hz |
| DMX Channels | 6, 7, 10, or 14 channels |
| Control Protocol | DMX512, RDM (optional) |
| Operating Modes | DMX, Standalone, Master/Slave, Sound Active |
| Dimensions (L x W x H) | 10.2 x 9.8 x 12.7 inches (259 x 249 x 323 mm) |
| Weight | 8.6 lbs (3.9 kg) |
| Housing Material | Aluminum die-cast |
| Cooling | Convection cooling, quiet operation |
| Display | 4-digit LED display with menu buttons |
| Connectors | 3-pin and 5-pin DMX in/out, PowerCon in/out |
| Protection Rating | IP20 (indoor use only) |
| Features | RGBWA+UV color mixing, strobe, dimmer, preset programs |
| Maintenance | Clean lens with soft dry cloth, ensure ventilation slots are clear |
| Safety | Use safety cable, mount securely, avoid moisture |
| Spare Parts | LED modules, power supplies, control boards available from manufacturer |
| Repairability | Modular design allows replacement of individual components |
Frequently Asked Questions - ElectraPix Par 7 Adj
How do I set the DMX address on the ElectraPix Par 7?
Press the Menu button until 'Addr' appears, then use Up/Down to select the desired DMX address. Press Enter to confirm.
What is the beam angle of this fixture?
The beam angle is 25 degrees, suitable for wash lighting applications.
Can I use the ElectraPix Par 7 outdoors?
No, it has an IP20 rating and is designed for indoor use only.
How do I switch to sound-active mode?
Press Menu until 'Snd' appears, then press Enter. Use Up/Down to choose sensitivity level. The fixture will react to music via its built-in microphone.
What type of power connector does it use?
It uses Neutrik PowerCon connectors for power input and output, allowing daisy-chaining of multiple fixtures.
How many DMX channels does it require?
The fixture can operate in 6, 7, 10, or 14 channel modes. Refer to the manual for channel assignments.
Can I control it without a DMX controller?
Yes, in standalone mode you can use built-in programs or sound-active mode. Multiple units can be linked as master/slave.
How do I clean the lens?
Use a soft, dry cloth to gently wipe the lens. Avoid using water or cleaning solvents.
What should I do if the fixture stops responding?
Check power connections and DMX cable. Try resetting by disconnecting power for 10 seconds. If problem persists, contact support.
Where can I find replacement LEDs?
Contact Adj customer service or authorized dealers for spare LED modules. The fixture is designed for easy replacement.
User questions about ElectraPix Par 7 Adj
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ElectraPix Par 7 - Adj and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ElectraPix Par 7 by Adj.
USER MANUAL ElectraPix Par 7 Adj
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Adj
Model : ElectraPix Par 7
Category : Uncategorized