GSP-8380TG - Measurement GW Instek - Free user manual and instructions
Find the device manual for free GSP-8380TG GW Instek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Spectrum Analyzer |
| Brand | GW Instek |
| Model | GSP-8380TG |
| Frequency Range | 9 kHz to 3.8 GHz |
| Resolution Bandwidth (RBW) | 10 Hz to 1 MHz (1-3 steps) |
| Display | Color TFT LCD, 8-inch |
| Tracking Generator | Built-in, 9 kHz to 3.8 GHz |
| Amplitude Measurement Range | -100 dBm to +30 dBm |
| Input Impedance | 50 Ω |
| Dimensions (W x H x D) | 330 mm x 170 mm x 400 mm |
| Weight | Approx. 6.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Interface | USB, LAN, GPIB (optional) |
| Main Functions | Spectrum analysis, EMI pre-compliance, measurement of frequency, power, and distortion |
| Maintenance and Cleaning | Use a soft, dry cloth; avoid solvents; keep vents clean |
| Safety Precautions | Use only the supplied power cord; do not exceed input limits; ensure proper grounding |
| Spare Parts and Repairability | Contact authorized service center for parts and repair |
| General Information | Includes user manual, power cord, and N-to-BNC adapter |
Frequently Asked Questions - GSP-8380TG GW Instek
How do I perform a calibration on the GSP-8380TG?
To calibrate, use the internal calibration function. Press System > Calibration and follow on-screen instructions. Ensure the input is terminated with a 50 Ω load.
What is the maximum input power?
The maximum input power is +30 dBm (1 W) with an input attenuator setting of 10 dB or higher. Exceeding this may damage the instrument.
How to set the resolution bandwidth?
Press BW key, then use the numeric keypad or rotary knob to select RBW from 10 Hz to 1 MHz.
Can I use the tracking generator for network analysis?
Yes, the built-in tracking generator allows scalar network analysis. Connect the generator output to the device under test and the DUT output to the analyzer input.
How do I save a screenshot?
Insert a USB drive, press Save/Recall, select Screenshot, and choose file format (PNG, BMP).
What is the minimum sweep time?
The minimum sweep time depends on RBW and span. For a 10 Hz RBW, it can be as low as 100 ms per sweep.
How do I update firmware?
Download the latest firmware from GW Instek website, save to USB, insert into the analyzer, press System > Firmware Update, and select the file.
What accessories are included?
The package includes a power cord, user manual (CD), N-to-BNC adapter, and USB cable.
Is the instrument suitable for EMI testing?
Yes, it has a pre-compliance EMI mode with quasi-peak detectors and CISPR bandwidths for preliminary testing.
How to clean the display?
Turn off the instrument, use a soft microfiber cloth lightly dampened with water. Do not use alcohol or abrasive cleaners.
User questions about GSP-8380TG GW Instek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual GSP-8380TG - GW Instek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSP-8380TG by GW Instek.
USER MANUAL GSP-8380TG GW Instek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GW Instek
Model : GSP-8380TG
Category : Measurement