Pyle

PRJG48 - Video projector Pyle - Free user manual and instructions

Find the device manual for free PRJG48 Pyle in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PRJG48 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeVideo Projector
ModelPRJG48
BrandPyle
Dimensions (L x W x H)6.5 x 4.5 x 2.8 inches
Weight1.2 lbs
Power SupplyDC 12V 2A Adapter
Native Resolution800 x 480 pixels
Maximum Resolution Supported1920 x 1080 pixels
Brightness2000 Lux
Contrast Ratio1000:1
Lamp LifeUp to 30,000 hours
Lamp TypeLED
InputsHDMI, USB, VGA, AV, Audio
Built-in SpeakerYes, 3W
Keystone CorrectionManual ±15°
Projection Size32 to 120 inches
CleaningWipe lens with soft, dry cloth. Keep vents dust-free.
SafetyAvoid moisture and direct sunlight. Ensure ventilation.
Spare Parts & RepairabilityLED light source not user-replaceable. No user-serviceable parts inside.
General InformationPortable LED projector suitable for home entertainment and presentations.

Frequently Asked Questions - PRJG48 Pyle

How do I connect my laptop to the Pyle PRJG48 projector?
Use an HDMI cable (or VGA with audio) to connect your laptop to the projector's HDMI (or VGA) input. Then select the correct input source using the remote or control panel.
Can I play videos directly from a USB drive?
Yes, the projector supports USB playback for compatible video, audio, and image files. Insert the USB drive into the USB port and select the USB source.
What is the native resolution of this projector?
The native resolution is 800 x 480 pixels. It can support up to 1080p input, but the display will be downscaled to native resolution.
How do I adjust the focus and keystone?
Rotate the focus ring on the lens to sharpen the image. Use the keystone correction buttons on the remote or panel to adjust trapezoid distortion.
Why is my image upside down or reversed?
Go to the settings menu and select Projection Mode. Choose Front, Rear, Ceiling Front, or Ceiling Rear to correct orientation.
What is the lamp life, and can I replace the LED bulb?
The LED lamp is rated for up to 30,000 hours. It is not user-replaceable; the entire unit may need service near end of life.
Can I use this projector outdoors?
Yes, but only in a dark environment to ensure visibility. Avoid direct sunlight and moisture. Use a screen for best results.
No picture after connecting HDMI. What should I try?
Check that the projector is set to the correct HDMI input (HDMI1/HDMI2). Try a different cable or device. Restart both devices.
How do I clean the projector lens and vents?
Turn off and unplug the projector. Use a soft, dry microfiber cloth to gently wipe the lens. Use compressed air to remove dust from vents. Never use liquids.
Does this projector have built-in speakers?
Yes, it has a built-in 3W speaker for audio. For better sound, you can connect external speakers via the audio output jack.

User questions about PRJG48 Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Video projector in PDF format for free! Find your manual PRJG48 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRJG48 by Pyle.

USER MANUAL PRJG48 Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PRJG48

Category : Video projector