VP130 - Receiver Music Hall - Free user manual and instructions
Find the device manual for free VP130 Music Hall in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Phono Preamplifier |
| Model | VP130 |
| Brand | Music Hall |
| Inputs | 1x RCA (Phono) |
| Outputs | 1x RCA (Line) |
| Gain | 40 dB |
| RIAA Equalization | Accurate within 0.5 dB |
| Power Supply | External DC adapter (12V, 500mA) |
| Dimensions (WxHxD) | 120 x 40 x 90 mm |
| Weight | 0.5 kg |
| Material | Aluminum chassis |
| Signal-to-Noise Ratio | >80 dB |
| Total Harmonic Distortion | <0.01% |
| Compatible Cartridges | Moving Magnet (MM) |
| Grounding | Screw terminal |
| Power Consumption | 2W |
| Color | Black |
| Accessories Included | Power adapter, RCA cables, grounding wire |
| Cleaning and Maintenance | Use a dry cloth; avoid liquids |
| Safety | Use only supplied power adapter; keep away from moisture |
| Spare Parts and Repairability | Contact authorized service center; no user-serviceable parts |
Frequently Asked Questions - VP130 Music Hall
What type of cartridge does the VP130 support?
The VP130 is designed for Moving Magnet (MM) cartridges. It provides the appropriate gain and RIAA equalization for MM outputs.
How do I connect the VP130 to my amplifier?
Connect the turntable's RCA cables to the Phono Input of the VP130. Then connect the VP130's Line Output to any line-level input (e.g., AUX, CD) on your amplifier. Ensure the ground wire is connected if needed.
Does the VP130 require a ground wire?
Yes, the VP130 has a ground screw terminal. Connect the turntable's ground wire to this terminal to reduce hum and noise.
What is the gain of the VP130?
The VP130 provides a 40 dB gain, which is standard for MM phono preamplifiers.
Can I use the VP130 with a moving coil cartridge?
No, the VP130 is optimized for Moving Magnet (MM) cartridges. Moving coil cartridges require higher gain and different loading; consider a dedicated MC phono preamp or a step-up transformer.
What power supply does the VP130 use?
The VP130 uses an external DC adapter with 12V output and 500mA current rating. Use only the supplied adapter to avoid damage.
How do I clean the VP130?
Clean the exterior with a soft dry cloth. Do not use any liquids or chemical cleaners, as they may damage the finish or internal components.
Is the VP130 compatible with my turntable?
The VP130 is compatible with any turntable that has a standard RCA output and a Moving Magnet cartridge. If your turntable has a built-in phono preamp, set it to 'Line Out' or disable the preamp.
What is the signal-to-noise ratio of the VP130?
The VP130 has a signal-to-noise ratio greater than 80 dB, ensuring low noise and clear audio reproduction.
How do I install the VP130?
Place the VP130 on a stable surface near your turntable and amplifier. Connect the power adapter, then connect the turntable to the input and amplifier to the output. Attach the ground wire if necessary. Turn on the VP130 and select the correct input on your amplifier.
User questions about VP130 Music Hall
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual VP130 - Music Hall and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VP130 by Music Hall.
USER MANUAL VP130 Music Hall
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Music Hall
Model : VP130
Category : Receiver