VP29 - Receiver Music Hall - Free user manual and instructions

Product Type	Phono Preamp (RIAA equalization)
Brand	Music Hall
Model	VP29
Dimensions (W x D x H)	3.25 x 2 x 1.5 inches
Weight	1 lb
Power Supply	12-18 VDC, tip negative
Input Connectors	Stereo RCA
Output Connectors	Stereo RCA, 1/4" TRS stereo
Ground Connector	Screw terminal for turntable ground
Input Sensitivity	35 dBV gain @ 1 kHz, 47k Ohms input impedance
Input Capacitance	5 pF + cable capacitance
Input Impedance	50k Ohms
Output Impedance	1k Ohms
Maximum Output Level	>10 dB @ 1 kHz at 1% distortion
Frequency Response	+/- 1.5 dB, 20 Hz - 20 kHz (RIAA equalized)
THD	0.02% @ 1 kHz
Signal-to-Noise Ratio	>80 dB unweighted
Compatible Cartridges	Magnetic phono pickups
Function	Amplifies and equalizes RIAA phono signal to line level
Recommended Use	Home audio, broadcast, studio
Cleaning	Wipe with dry cloth; avoid liquids
Safety	Use only specified power supply; keep away from moisture
Warranty	Register online at rolls.com

Frequently Asked Questions - VP29 Music Hall

What type of turntable cartridge is compatible with the VP29?

The VP29 is designed for magnetic phono pickups (moving magnet). It will not work with ceramic or crystal cartridges.

How do I connect the VP29 to my turntable and amplifier?

Connect the turntable's RCA cables to the INPUT jacks and connect the ground wire to the GROUND terminal. Then connect the OUTPUT jacks (RCA or 1/4" TRS) to your amplifier or receiver.

What power supply does the VP29 require?

It requires a DC power supply of 12-18 VDC with a tip negative polarity. Use the included adapter or one with at least 100mA.

Can I use the VP29 with a powered speaker?

Yes, the VP29 outputs line-level signal, so you can connect it directly to powered speakers or an amplifier's line input.

Why is there no sound or very low volume?

Check that the turntable is connected to the INPUT jacks, the ground wire is secured, and the power is on. Make sure the output is connected to a line-level input, not a phono input.

Does the VP29 need a ground connection?

Yes, connecting the turntable's ground wire to the GROUND terminal helps reduce hum and noise.

What is the frequency response of the VP29?

The frequency response is +/- 1.5 dB from 20 Hz to 20 kHz, conforming to the RIAA equalization curve.

Can I use both RCA and 1/4" outputs simultaneously?

Yes, you can use both outputs at the same time to connect to multiple devices.

What is the input impedance of the VP29?

The input impedance is 47k Ohms at 1 kHz, which is standard for magnetic phono cartridges.

How do I clean and maintain the VP29?

Clean the exterior with a soft, dry cloth. Avoid using liquids or abrasive cleaners. Keep the unit away from moisture and extreme temperatures.

USER MANUAL VP29 Music Hall

Thank you for your purchase of the Rolls VP29 Phono Preamp. The VP29 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and it works well with magnetic pickups.

INSPECTION

1. Unpack and Inspect the VP29 package

Your VP29 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future.

WARRANTY:

For complete warranty information please visit our website at www.rolls.com, and click on the Register Your Warranty Here button.

DESCRIPTION

PWR INPUT: 12 - 16 Volts DC, tip negative jack.

GROUND CONNECTOR: Connects to the Ground of the phono player

INPUT: Stereo RCA jacks for connection to the phono player OUTPUT: Stereo RCA jacks for connection to a stereo system or amplifier.

OUTPUT: 1/4" Tip-Ring-Sleeve jack for connection to a stereo amplifier.

OPERATION

Shown below is an example of how to connect your VP29.

SCHEMATIC

... anywhere you need clean RfAA EQ to professional line level conversion.

ROLLS

- Broadcast

- Studio

- Home

Vp29 PHONO PREAMP

PHONO PRELAMP

Vp29

ROLLS

VP29 Phono Preamp

• Converts RIAA Phono signals to Line Level
• Works well with magnetic phono pickups
• Stereo RCA and 1/4" outputs

Phono players require special equalization because of the frequency response of recording on vinyl.

The VP29 equalizes and amplifies the phono signal to a clean, and full line level for professional amplification.

SPECIFICATIONS

I/ O Connectors: RCA, 1/4" TRS Stereo

Input Sensitivity: 35 dBV gain @

1kHz, 47k Ohms Input Z

Input Capacitance: 5pf + cable capacitance

Input Impedance: 50k Ohms

Output Impedance: 1 K Ohms

Max Output Level: >10dB @ 1kHz at at 1% dist.

Frequency Response: + / - 1.5dB 20 Hz - 20 kHz

(Conforms to RIAA

Equalization Curve)

THD .02% @ 1 kHz

S/N Ratio: >80 dB unweighted

PWR: 12 - 18 VDC

Size: 3.25 x 2 x 1.5

Weight: 1 lb

ROLLS

Rolls Corporation Salt Lake City, UT 11/03

VP29 Phono Preamp