RX30RF - Receiver Salus - Free user manual and instructions
Find the device manual for free RX30RF Salus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Radio Frequency Receiver |
| Brand | Salus |
| Model | RX30RF |
| Dimensions | Approximately 85 x 85 x 30 mm |
| Weight | Approximately 150 g |
| Power Supply | 230V AC, 50Hz |
| Frequency Band | 868 MHz (SRD band) |
| Max Load | 16A (resistive), 3A (inductive) |
| Range | Up to 100 m in open space |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP30 |
| Compatible Thermostats | Salus RT300RF, RT310RF, RT500RF |
| Main Functions | Receives wireless commands from thermostat to control heating/cooling system |
| Installation | Wall mounting with included screws and anchors |
| Maintenance | Wipe with dry cloth; do not use solvents |
| Safety | Complies with CE standards; double insulation |
| Spare Parts | Available through Salus customer service |
| Repairability | Repairable by qualified technician; no user-serviceable parts |
| Warranty | 2 years from date of purchase |
Frequently Asked Questions - RX30RF Salus
How do I pair the RX30RF receiver with my Salus thermostat?
Ensure the receiver is powered on. Press the pairing button on the receiver for 3 seconds until the LED flashes. Then on your thermostat, initiate pairing mode (refer to thermostat manual). The LED will become steady when paired.
What is the maximum distance between the receiver and thermostat?
The wireless range is up to 100 meters in open space. Walls and metal objects can reduce the range.
Can the RX30RF control both heating and cooling systems?
Yes, it can control both heating and cooling systems when paired with a compatible thermostat that supports dual mode.
The receiver LED is not lighting up. What could be wrong?
Check the power supply: ensure the circuit breaker is on and the receiver is properly connected to 230V AC. If the LED still does not light, the unit may be faulty.
How do I reset the RX30RF to factory settings?
Press and hold the pairing button for 10 seconds until the LED blinks rapidly, then release. This will erase all paired thermostats.
What is the maximum load the receiver can handle?
The receiver can handle up to 16A resistive (e.g., electric heaters) and 3A inductive (e.g., pumps, fans).
Can I use the RX30RF with a smart home system?
The RX30RF is designed for use with Salus thermostats. It does not directly integrate with other smart home systems unless paired via a compatible Salus gateway.
How do I clean the receiver?
Disconnect power before cleaning. Use a soft dry cloth. Do not use water, solvents, or abrasive cleaners.
The thermostat shows 'no communication' with the receiver. What should I do?
Check if the receiver has power. Verify the thermostat is within range. Try re-pairing the devices. Obstructions or interference may also cause communication loss.
Where can I find the user manual for the RX30RF?
The user manual is available for free download on Notice-Facile.com in PDF format. You can also request a translated version by email.
User questions about RX30RF Salus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual RX30RF - Salus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RX30RF by Salus.
USER MANUAL RX30RF Salus
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Salus
Model : RX30RF
Category : Receiver