SPT30A - Uncategorized Bogen - Free user manual and instructions
Find the device manual for free SPT30A Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Speaker |
| Dimensions (H x W x D) | 12.5 x 8.0 x 7.5 inches |
| Weight | 12.5 lbs (5.7 kg) |
| Power Handling (RMS) | 100 Watts |
| Frequency Response | 60 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 89 dB (1W/1m) |
| Input Type | Binding posts (banana plugs) |
| Mounting Options | Bookshelf or stand mount |
| Enclosure Type | Bass reflex with rear port |
| Driver Configuration | 2-way: 1" tweeter, 5.25" woofer |
| Construction Material | MDF with vinyl veneer |
| Color | Black or White |
| Warranty | 5 years (limited) |
| Recommended Amplifier Power | 20-150 Watts per channel |
Frequently Asked Questions - SPT30A Bogen
How do I connect the SPT30A to my amplifier?
Use speaker wire with banana plugs or bare wire. Connect the positive (+) terminal of the speaker to the positive output of your amplifier, and the negative (-) to negative. Ensure the amplifier is turned off during connection.
What is the recommended placement for best sound quality?
Place the speakers at ear level, away from walls to avoid bass boom. For stereo, form an equilateral triangle with your listening position. Keep the rear port at least 6 inches from the wall.
Can I use these speakers outdoors?
No, the SPT30A is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the drivers and cabinet.
What power amplifier should I use with the SPT30A?
Use an amplifier rated between 20 and 150 watts per channel at 8 ohms. Avoid underpowering to prevent clipping, which can damage the speakers.
How do I clean the speakers?
Wipe the cabinet with a dry or slightly damp cloth. Do not use harsh chemicals. For the grille, gently vacuum with a soft brush attachment.
The speaker sounds distorted. What should I check?
Check your amplifier volume: reduce it if clipping. Ensure speaker wires are securely connected and not shorted. Verify the source is not distorted. If problem persists, test with another speaker.
Can I mount these speakers on a wall?
Yes, but use appropriate wall brackets designed for bookshelf speakers. Ensure the bracket can support the weight (12.5 lbs). Avoid mounting directly on the back panel as it may obstruct the rear port.
What is the warranty coverage?
Bogen offers a 5-year limited warranty covering defects in materials and workmanship. Register your purchase on their website to activate.
Are the drivers replaceable?
Yes, the tweeter and woofer can be replaced. Contact Bogen customer service for compatible replacement parts and service instructions.
Why is there no sound from one speaker?
Check the speaker wire connection at both ends. Try swapping speakers on the amplifier to isolate the issue. If the problem follows the speaker, it may be defective; if not, check the amplifier channel.
User questions about SPT30A Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SPT30A - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPT30A by Bogen.
USER MANUAL SPT30A Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : SPT30A
Category : Uncategorized