Naxa

NDS-8006D - Loudspeaker Naxa - Free user manual and instructions

Find the device manual for free NDS-8006D Naxa in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Naxa NDS-8006D - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Naxa
Model NDS-8006D
Product Type Portable Bluetooth Speaker
Dimensions (W x H x D) 11.0 x 5.5 x 4.0 inches (approx.)
Weight 1.8 lbs (approx.)
Power Source Built-in rechargeable battery (DC 5V via USB)
Battery Life Up to 6 hours (at moderate volume)
Bluetooth Version 5.0
Wireless Range Up to 33 feet (10 meters)
Audio Output Power 5W (RMS)
Frequency Response 100 Hz - 20 kHz
Driver Size 2.5 inches (full-range)
Inputs Bluetooth, AUX 3.5mm, MicroSD card, USB
Controls Power, Volume, Play/Pause, Track control, Mode
Additional Features Built-in microphone for hands-free calls, FM radio
Color Options Black, Red, Blue (subject to availability)
Care Instructions Wipe with dry cloth; avoid moisture and extreme temperatures
Safety Warnings Do not disassemble; use only supplied charger; keep away from water
Replacement Parts Contact Naxa support for battery or charger replacement
Manufacturer Support Visit naxa.com for manual downloads and customer service

Frequently Asked Questions - NDS-8006D Naxa

How do I pair my Naxa NDS-8006D with a Bluetooth device?
Turn on the speaker and press the Bluetooth button (or Mode) to enter pairing mode. On your device, select 'NDS-8006D' from the Bluetooth list. If asked, enter 0000 as the PIN.
What is the battery life of the NDS-8006D?
The built-in battery provides up to 6 hours of playback at moderate volume. Actual battery life may vary depending on volume and audio content.
How do I charge the speaker?
Use the included USB charging cable (Micro USB) connected to a computer or a 5V USB charger. The LED indicator will show red while charging and turn blue when fully charged.
Can I use the speaker while it's charging?
Yes, you can play audio while the speaker is charging, though it may take longer to reach full charge.
Why is there no sound from the speaker?
Check that the speaker is turned on and volume is not muted. Ensure your device is paired via Bluetooth or connected via AUX cable. If using AUX, make sure the cable is fully inserted.
How do I reset the NDS-8006D?
To reset, turn off the speaker, then press and hold the Power button for 10 seconds until the LED flashes quickly. Release and turn on normally.
Does the speaker have a microphone for hands-free calls?
Yes, the NDS-8006D has a built-in microphone. When a call comes in, press the Play/Pause button to answer. Press again to hang up.
Can I use a microSD card with this speaker?
Yes, insert a microSD card (up to 32GB) with MP3 files into the slot. The speaker will automatically switch to microSD mode and play the files.
How do I switch between Bluetooth, AUX, and FM modes?
Press the Mode button repeatedly to cycle through Bluetooth, AUX, microSD, and FM radio modes. The current mode will be announced or indicated by the LED.
What should I do if the speaker gets wet?
Immediately dry the speaker with a soft cloth and let it air dry completely before using. Do not expose to moisture regularly as it is not waterproof.

User questions about NDS-8006D Naxa

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual NDS-8006D - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NDS-8006D by Naxa.

USER MANUAL NDS-8006D Naxa

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Naxa

Model : NDS-8006D

Category : Loudspeaker