KI-398-B-RGL - Uncategorized KLIPSCH - Free user manual and instructions
Find the device manual for free KI-398-B-RGL KLIPSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive loudspeaker |
| Dimensions (H x W x D) | 12.5 x 7.5 x 9.2 inches |
| Weight | 12.5 lbs (5.7 kg) |
| Frequency Response | 58 Hz – 20 kHz ± 3 dB |
| Sensitivity | 95 dB (1 watt @ 1 meter) |
| Impedance | 8 ohms |
| Power Handling (Continuous/Peak) | 100W / 400W |
| Drivers | 1-inch titanium horn tweeter, 8-inch copper-spun magnetically shielded woofer |
| Enclosure Type | Bass-reflex through rear-firing port |
| Inputs | Dual binding posts for bi-wiring or bi-amping |
| Grille | Magnetic, removable |
| Finish | Black textured vinyl |
| Recommended Amplifier Power | Up to 150W per channel |
| Maximum Acoustic Output | 110 dB SPL |
| Crossover Frequency | 2,200 Hz |
| Warranty | 5 years (parts and labor) |
| Placement | Bookshelf or stand, minimum 6 inches from rear wall |
| Included Accessories | User manual, rubber feet, cleaning cloth |
Frequently Asked Questions - KI-398-B-RGL KLIPSCH
How do I connect the speaker to my amplifier?
Use high-quality speaker wire and connect to the binding posts on the back of the speaker. Ensure the amplifier is turned off while connecting.
What is the recommended placement for optimal sound?
Place the speaker on a sturdy surface at ear level, at least 6 inches from walls to allow proper bass response. Avoid corners.
Can I use this speaker outdoors?
The KI-398-B-RGL is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the speaker.
How do I clean the speaker?
Use a dry, soft cloth to wipe the cabinet. Do not use water or chemicals. The grille can be removed and cleaned with a vacuum on low suction.
What is the impedance of the speaker?
The speaker has a nominal impedance of 8 ohms, compatible with most stereo receivers and amplifiers.
Does the speaker include a subwoofer?
No, this is a full-range bookshelf speaker. For deeper bass, consider adding a separate Klipsch subwoofer.
What is the maximum power I can use?
The speaker can handle up to 100W continuous and 400W peak. Exceeding these limits may cause damage.
How do I bi-wire or bi-amp the speaker?
Remove the metal jumpers between the binding posts. Connect separate amplifier channels or cables to the high and low frequency terminals.
Is the speaker shielded for use near CRTs?
The woofer is magnetically shielded, allowing safe placement near older televisions and monitors.
What should I do if the speaker produces no sound?
Check connections, ensure the amplifier is on and set to the correct source, and verify the speaker wires are firmly connected to the binding posts.
User questions about KI-398-B-RGL KLIPSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual KI-398-B-RGL - KLIPSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KI-398-B-RGL by KLIPSCH.
USER MANUAL KI-398-B-RGL KLIPSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KLIPSCH
Model : KI-398-B-RGL
Category : Uncategorized