WP-700-AM - Controller TOA - Free user manual and instructions
Find the device manual for free WP-700-AM TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Controller |
| Brand | TOA |
| Model | WP-700-AM |
| Dimensions (H x W x D) | 4.33 x 6.10 x 2.17 inches (110 x 155 x 55 mm) |
| Weight | 1.54 lbs (0.7 kg) |
| Power Supply | 24 V DC, 0.5 A (supplied by external adapter) |
| Power Consumption | 12 W max |
| Control Interface | RS-232C, Contact closure inputs (4) |
| Audio Input | Mic/Line input (1), RCA input (1) |
| Audio Output | Line output (1), speaker output (4 Ω, 8 Ω) |
| Frequency Response | 20 Hz – 20 kHz ±1 dB |
| Total Harmonic Distortion | <0.1% |
| Signal-to-Noise Ratio | 80 dB |
| Protection Rating | IP20 (indoor use only) |
| Operating Temperature | 32°F – 104°F (0°C – 40°C) |
| Mounting | Wall-mountable (bracket included) |
| Material | Steel chassis, ABS plastic front panel |
| Indicators | Power LED, status LED for each input |
| Cleaning Instructions | Wipe with dry soft cloth; do not use solvents or water |
| Spare Parts Availability | Contact TOA authorized dealers for replacement parts |
| Compliance | CE, RoHS |
Frequently Asked Questions - WP-700-AM TOA
What is the power requirement for the TOA WP-700-AM controller?
The controller requires a 24 V DC power supply with a minimum current of 0.5 A. An external adapter is provided with the unit.
Can the WP-700-AM be used outdoors?
No, the WP-700-AM has an IP20 rating, meaning it is protected against solid particles larger than 12 mm but not against water. It should be installed indoors only.
How do I connect the controller to my audio system?
Connect your audio source to the mic/line input or RCA input. Then connect the line output to your amplifier or the speaker output directly to 4 Ω or 8 Ω speakers.
What are the control interfaces available on this device?
The WP-700-AM features an RS-232C serial port for remote control and four contact closure inputs for external switching.
How do I mount the WP-700-AM to a wall?
Use the included wall-mount bracket. Secure the bracket to the wall with appropriate screws, then slide the controller onto the bracket until it clicks into place.
What does the status LED indicate?
The power LED glows green when the unit is powered. Each input channel has a status LED that lights up when signal is detected.
Is the WP-700-AM compatible with all TOA speakers?
The controller can drive 4 Ω or 8 Ω speakers. It is compatible with most passive TOA speakers designed for these impedances.
How do I clean the front panel?
Use a dry, soft cloth to wipe the front panel. Do not use any liquids or abrasive cleaners to avoid damage.
Where can I find the user manual for the WP-700-AM?
The user manual can be downloaded for free from the TOA website or from notice-facile.com in PDF format.
What should I do if the controller does not power on?
Check that the 24 V DC adapter is properly plugged into a working outlet and connected to the controller. If the issue persists, contact TOA support.
User questions about WP-700-AM TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual WP-700-AM - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WP-700-AM by TOA.
USER MANUAL WP-700-AM TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : WP-700-AM
Category : Controller