EVO-3008CH - Air Conditioning Evolar - Free user manual and instructions
Find the device manual for free EVO-3008CH Evolar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | EVO-3008CH |
| Brand | Evolar |
| Cooling Capacity | 12000 BTU (3516 W) |
| Energy Efficiency Ratio (EER) | 2.6 |
| Airflow | 400 m³/h |
| Noise Level | ≤ 65 dB(A) |
| Operating Modes | Cool, Dehumidify, Fan |
| Temperature Control | Remote with LCD display |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Cooling) | 1350 W |
| Dimensions (W x D x H) | 44.8 x 38.5 x 71.0 cm |
| Weight | 27.5 kg |
| Refrigerant | R290 / 200 g |
| Condenser Type | Air-cooled |
| Installation | Window kit included (exhaust hose) |
| Filter Cleaning | Every 2 weeks |
| Self-Evaporation | Yes (automatic water removal) |
| Timer | Up to 24 hours |
| Safety Features | Auto shut-off, overload protection |
| Warranty | 2 years |
Frequently Asked Questions - EVO-3008CH Evolar
How do I install the Evolar EVO-3008CH air conditioner?
Install the exhaust hose in a window using the included kit. Ensure the unit is on a level surface and the filter is clean. Plug into a grounded outlet.
How often should I clean the air filter?
Clean the filter every two weeks by rinsing with lukewarm water and drying completely before reinserting.
What do the error codes on the display mean?
Common codes: E1 (room sensor fault), E2 (coil sensor fault), E3 (condenser sensor fault). Contact support for details.
Can I use the air conditioner without the exhaust hose?
No, the exhaust hose is essential for expelling hot air. Operating without it will cause overheating and poor performance.
How do I switch between cooling and fan modes?
Use the remote control or the unit's panel to select MODE. Press repeatedly to cycle through Cool, Dehumidify, and Fan.
The unit is not cooling properly. What should I check?
Ensure the filter is clean, the exhaust hose is not kinked, and the window kit is sealed. Also check that the set temperature is lower than room temperature.
Does this air conditioner require water drainage?
The EVO-3008CH has self-evaporation technology that removes most condensate. In humid conditions, a continuous drain hose can be attached.
What is the maximum room size for this unit?
It is suitable for rooms up to 30 m² (320 sq ft) under normal conditions.
How do I reset the timer?
Press the TIMER button on the remote to set or cancel the timer. Holding the button for 3 seconds resets it.
Can I use an extension cord with this air conditioner?
No, plug directly into a grounded wall outlet. Extension cords may cause voltage drop and fire risk.
User questions about EVO-3008CH Evolar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual EVO-3008CH - Evolar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVO-3008CH by Evolar.