SPLCDCB100 - Receiver Xantech - Free user manual and instructions
Find the device manual for free SPLCDCB100 Xantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IR Receiver (Ceiling Mount) |
| Brand | Xantech |
| Model | SPLCDCB100 |
| Dimensions (H x W x D) | 2.2 x 0.9 x 0.9 inches |
| Weight | 0.1 lbs (45 g) |
| Power Supply | 12V DC via connection block |
| IR Frequency | 38 kHz |
| Coverage Angle (Horizontal) | 360 degrees |
| Coverage Angle (Vertical) | 180 degrees |
| Range (Line-of-Sight) | Up to 100 feet |
| Connectivity | 3-wire screw terminals (Power, Ground, Signal) |
| LED Indicator | Power/IR signal reception (red) |
| Material | ABS plastic |
| Color | White (matte finish) |
| Mounting | Ceiling mount (surface or recessed with bracket) |
| Compatibility | Xantech connection blocks and compatible automation systems |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 0-90% non-condensing |
| Included Accessories | Mounting bracket, screws, connection block |
| Warranty | 2 years (manufacturer limited) |
| Certifications | FCC, CE, RoHS |
| Repair / Parts | Contact Xantech customer support for service |
Frequently Asked Questions - SPLCDCB100 Xantech
How do I install the SPLCDCB100 receiver?
Mount the receiver to a ceiling using the provided bracket. Connect the three wires (power, ground, signal) to a compatible Xantech connection block. Ensure power is 12V DC.
What is the operating range of the IR receiver?
The SPLCDCB100 has a line-of-sight range of up to 100 feet (30 meters) with a 360° horizontal and 180° vertical coverage angle.
Can I use this receiver with non-Xantech remote controls?
The receiver is designed for use with any IR remote that operates at 38 kHz. It should work with standard consumer remotes.
Why is the LED not lighting up?
Check that the power supply is providing 12V DC and that the connections are secure. The LED lights when IR signals are detected; if no signal, the LED remains off.
How do I clean the IR receiver lens?
Gently wipe the lens with a soft, dry cloth. Do not use any liquids or abrasive cleaners, as they may damage the surface.
Is the SPLCDCB100 weatherproof?
No, this receiver is intended for indoor use only. Exposure to moisture or extreme temperatures may damage it.
Can I extend the cables beyond the standard length?
Yes, you can extend the wires, but keep total cable length under 200 feet to avoid signal degradation. Use shielded cable for best results.
What voltage does this receiver require?
It requires a 12V DC power supply. Ensure your connection block provides this voltage.Do not use AC power.
Does it support multiple IR codes simultaneously?
The receiver passes all IR signals it receives, so it supports any 38 kHz code. However, if multiple remotes send signals at once, they may interfere.
What should I do if the receiver stops working?
First, verify power and connections. Test with a known working IR remote. If still not working, contact Xantech support for troubleshooting or replacement.
User questions about SPLCDCB100 Xantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual SPLCDCB100 - Xantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPLCDCB100 by Xantech.
USER MANUAL SPLCDCB100 Xantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xantech
Model : SPLCDCB100
Category : Receiver