iLux CLS-C6A - Controller Crestron - Free user manual and instructions
Find the device manual for free iLux CLS-C6A Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lighting Scene Controller Keypad |
| Model | iLux CLS-C6A |
| Brand | Crestron |
| Number of Buttons | 6 |
| Dimensions (H x W x D) | 4.5 in x 4.5 in x 1.5 in (114 mm x 114 mm x 38 mm) |
| Weight | 4.2 oz (120 g) |
| Power Requirements | Cresnet (24 VDC) or external power supply |
| Power Consumption | 1.5 W typical |
| Key Functions | Scene recall, load control, raise/lower, preset |
| Backlighting | Programmable LED |
| Compatibility | Crestron 3-Series and 4-Series control systems |
| Mounting | Single-gang electrical box |
| Operating Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% (non-condensing) |
| Maintenance | Clean with a soft, dry cloth; avoid liquids and abrasives |
| Safety Certifications | CE, FCC, RoHS |
| Spare Parts / Repairability | Contact Crestron for replacement parts; not user-serviceable |
| Included Accessories | Mounting screws, installation guide |
| Warranty | 2 years (Crestron standard) |
Frequently Asked Questions - iLux CLS-C6A Crestron
How do I program the iLux CLS-C6A keypad?
Programming requires Crestron Toolbox software and a connection to the control system via Cresnet. Use the iLux Configuration Tool in Toolbox to assign scenes and button functions.
Can I use the CLS-C6A without a Crestron control system?
No. The iLux CLS-C6A is designed exclusively for use with Crestron control systems and requires a Cresnet connection to operate.
What is the maximum number of scenes per button?
Each button can trigger a single scene, but sequences and multiple loads can be programmed through the control system for advanced functionality.
How do I reset the keypad to factory defaults?
Press and hold the top and bottom buttons simultaneously for 10 seconds until the LEDs flash. This resets programming but does not affect the control system.
Is the CLS-C6A compatible with LED loads?
Yes, but compatibility depends on the dimmer module connected to the control system. The keypad itself does not handle load directly.
Can I customize the button labels?
Yes. The buttons accept custom engraving or adhesive labels. Crestron offers engraving services or you can use printable label inserts.
What Cresnet cable is required?
Standard 4-conductor Cresnet cable (CRESNET-P) or equivalent. Maximum cable length depends on the system, typically up to 2500 ft.
Does the keypad support multi-tap or press-and-hold?
Yes. Single tap, double tap, and press-and-hold can be programmed for different functions via the control system.
How do I update the firmware?
Firmware updates are done through Crestron Toolbox. Connect the keypad via Cresnet, select the device, and use the Firmware tab to upload the latest file.
What do the LED indicators mean?
LED backlight indicates feedback. Solid = scene active; slow blink = ramp in progress; fast blink = programming mode or error.
User questions about iLux CLS-C6A Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual iLux CLS-C6A - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iLux CLS-C6A by Crestron.
USER MANUAL iLux CLS-C6A Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : iLux CLS-C6A
Category : Controller