iLux CLS-C6MB - Controller Crestron - Free user manual and instructions
Find the device manual for free iLux CLS-C6MB Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lighting Controller |
| Brand | Crestron |
| Model | iLux CLS-C6MB |
| Category | Controller |
| Dimensions (approx) | 5.0 in x 3.0 in x 1.2 in (127 mm x 76 mm x 30 mm) |
| Weight (approx) | 0.5 lb (227 g) |
| Power Supply | PoE (Power over Ethernet) or 24 VDC |
| Main Functions | Control of lighting loads, scene recall, keypad interface, integration with Crestron systems |
| User Interface | 6-button keypad with backlit buttons |
| Communication | Crestron InfiNET EX wireless or Ethernet |
| Load Types Supported | Incandescent, LED, fluorescent, ELV, MLV (0-10V dimming) |
| Maximum Load per Channel | 5 A at 120 VAC (typical) |
| Installation | Wall-mounted in a standard backbox |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Maintenance | Wipe with a dry cloth; no liquids or solvents |
| Safety | Complies with UL, CE, FCC standards; install by qualified personnel |
| Spare Parts & Repairability | No user-serviceable parts; contact Crestron support |
| Warranty | Limited lifetime warranty (Crestron standard) |
Frequently Asked Questions - iLux CLS-C6MB Crestron
How do I reset the iLux CLS-C6MB to factory defaults?
Press and hold the top two buttons simultaneously for 10 seconds until all LEDs flash. Release to reset.
Can the iLux CLS-C6MB control LED lights?
Yes, it supports dimmable LED loads via trailing-edge or 0-10V control. Ensure compatibility with the specific LED driver.
What is the maximum number of buttons I can assign?
The unit has six physical buttons, but each can be programmed for multiple functions (e.g., tap, double-tap, hold).
Does it require a neutral wire for installation?
Yes, the CLS-C6MB requires a neutral connection for power. If none is available, consult an electrician.
How do I pair the iLux CLS-C6MB with a Crestron system?
Use the Crestron Toolbox software to discover and assign the device to a room and link it to the processor via InfiNET EX.
Can I use it without a Crestron processor?
No, it is designed to operate as part of a Crestron lighting control system with a compatible processor.
What happens during a power outage?
The device retains its programmed settings in non-volatile memory. Upon power restore, it returns to the last known state.
How do I clean the keypad?
Use a soft, dry cloth. Do not use chemical cleaners or water, as they may damage the electronics.
Is the CLS-C6MB compatible with third-party lighting fixtures?
It works with standard dimmable fixtures (incandescent, LED, fluorescent) that accept 0-10V or phase dimming. Check load specifications.
What is the common troubleshooting step if the keypad does not respond?
First, verify power via PoE or 24V supply. Then check the network connection. If issues persist, try a factory reset or contact Crestron support.
User questions about iLux CLS-C6MB Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual iLux CLS-C6MB - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iLux CLS-C6MB by Crestron.
USER MANUAL iLux CLS-C6MB Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : iLux CLS-C6MB
Category : Controller