AMP310VS - Amplifier AudioSource - Free user manual and instructions
Find the device manual for free AMP310VS AudioSource in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Integrated Amplifier |
| Model | AMP310VS |
| Brand | AudioSource |
| Power Output (per channel) | 100W RMS into 8 ohms |
| Total Harmonic Distortion | < 0.05% |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | > 90 dB |
| Dimensions (W x H x D) | 430 x 100 x 300 mm |
| Weight | 8.0 kg |
| Power Supply | AC 120V / 60 Hz (or 220-240V / 50 Hz) |
| Inputs | 3x RCA, 1x Phono (MM), 1x AUX |
| Outputs | Speaker A/B, Headphone, Pre-out |
| Speaker Impedance | 4 - 16 ohms |
| Protection Features | Short circuit, overheat, overload |
| Remote Control | Included (infrared) |
| Cabinet Material | Aluminum front panel, steel chassis |
| Operating Temperature | 0°C - 40°C |
| Maintenance | Wipe with dry cloth; do not use solvents |
| Safety Certifications | CE, FCC, RoHS |
| Spare Parts Availability | Contact AudioSource support |
Frequently Asked Questions - AMP310VS AudioSource
How do I connect my speakers to the AMP310VS?
Use the speaker terminals on the back panel. Connect the positive (+) terminal of the amplifier to the positive terminal of the speaker, and negative (-) to negative. Ensure impedance is between 4 and 16 ohms. Use bare wire or banana plugs.
What is the power output of this amplifier?
The AudioSource AMP310VS delivers 100 watts RMS per channel into 8 ohms, with low distortion. It is suitable for moderate to large rooms.
Does the AMP310VS have a phono input?
Yes, it includes a dedicated phono input for moving magnet (MM) turntables. No external phono preamp is needed.
Can I use the amplifier with a subwoofer?
Yes, the AMP310VS has a pre-out output that can be connected to a powered subwoofer. Use a standard RCA cable.
How do I clean the amplifier?
Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or liquids. Avoid moisture.
What should I do if the amplifier overheats?
The amplifier has thermal protection. If it shuts off, turn it off, let it cool for 30 minutes, ensure proper ventilation, and reduce the volume.
Is there a warranty for the AMP310VS?
Yes, AudioSource offers a 2-year limited warranty from the date of purchase. Keep your receipt for service.
Can I use banana plugs with the speaker terminals?
Yes, the binding posts accept banana plugs. Remove the plastic caps if necessary, and insert the plug securely.
Why is there no sound from one channel?
Check speaker connections, ensure balance control is centered, and try swapping speakers to isolate the issue. If the problem persists, a faulty channel may need service.
What is the recommended power cable?
Use the supplied power cord. For replacement, use a cord rated for 10A and 250V with the appropriate plug for your region.
User questions about AMP310VS AudioSource
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Amplifier in PDF format for free! Find your manual AMP310VS - AudioSource and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP310VS by AudioSource.
USER MANUAL AMP310VS AudioSource
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioSource
Model : AMP310VS
Category : Amplifier