MD213 - Loudspeaker AudioSource - Free user manual and instructions
Find the device manual for free MD213 AudioSource in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Dimensions (H x W x D) | 12.6 x 8.3 x 7.1 inches |
| Weight | 10.2 lbs |
| Impedance | 8 Ohms |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 87 dB SPL |
| Power Handling (RMS) | 40 - 80 Watts |
| Driver Configuration | 2-Way: 1" Tweeter, 5.25" Woofer |
| Enclosure Type | Bass Reflex (Rear Port) |
| Connectivity | 5-Way Binding Posts |
| Mounting Options | Bookshelf or Stand Mount (1/4"-20 Inserts) |
| Recommended Placement | At least 8 inches from rear wall for optimal bass |
| Warranty | Limited 2-Year Warranty |
| Maintenance | Wipe with a dry, soft cloth; do not use solvents |
| Cleaning | Use a soft brush or vacuum with low suction on grille |
| Safety Precautions | Avoid exposure to moisture, heat, and direct sunlight |
| Spare Parts / Repairability | No user-serviceable parts; contact authorized service center |
Frequently Asked Questions - MD213 AudioSource
How do I connect the AudioSource MD213 speakers to my amplifier?
Use speaker wire with banana plugs or bare wire. Connect the positive (+) terminal of the speaker to the corresponding amplifier output. Ensure impedance matches (8 ohms).
What is the recommended amplifier power for these speakers?
An amplifier with 20-100 Watts RMS per channel at 8 ohms is suitable. Avoid clipping or distortion at high volumes.
Can I use the MD213 as a center channel speaker?
Yes, it can be used as a center channel if positioned horizontally. Ensure consistent impedance and sensitivity with other speakers.
How should I position the speakers for best sound?
Place them at ear level, angled slightly inward. Keep at least 8 inches from rear wall to avoid boomy bass. Use stands for optimal placement.
What is the bass response of the MD213?
The frequency response extends down to 55 Hz. For deeper bass, consider adding a subwoofer.
How do I clean the speaker grille and cabinet?
Remove the grille gently. Clean the cabinet with a dry microfiber cloth. For the grille, use a soft brush or vacuum with low suction. Avoid moisture.
Are the speakers magnetically shielded?
No, they are not magnetically shielded. Keep them at least 12 inches away from CRT monitors or sensitive electronic devices.
Can I wall-mount the MD213 speakers?
Yes, they have 1/4"-20 threaded inserts on the back. Use compatible wall mounts rated for the speaker's weight (10.2 lbs).
What type of speaker wire should I use?
Use 16-gauge or thicker speaker wire for runs up to 50 feet. For longer runs, use 14-gauge wire.
How do I break in the new speakers?
Play music at moderate volume for 20-30 hours. Avoid extremely loud levels initially. The bass and smoothness will improve over time.
User questions about MD213 AudioSource
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual MD213 - AudioSource and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD213 by AudioSource.
USER MANUAL MD213 AudioSource
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AudioSource
Model : MD213
Category : Loudspeaker