PSBVSUB20 - Soundbar Pyle - Free user manual and instructions
Find the device manual for free PSBVSUB20 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soundbar with Wireless Subwoofer |
| Model | PSBVSUB20 |
| Brand | Pyle |
| Dimensions (Soundbar) | Approx. 36 x 2.5 x 3 inches (91 x 6.4 x 7.6 cm) |
| Dimensions (Subwoofer) | Approx. 12 x 12 x 12 inches (30.5 x 30.5 x 30.5 cm) |
| Weight (Soundbar) | Approx. 3.5 lbs (1.6 kg) |
| Weight (Subwoofer) | Approx. 8 lbs (3.6 kg) |
| Power Supply | AC 100-240V, 50/60Hz (Soundbar via external adapter; Subwoofer direct AC) |
| Power Output | 120W RMS total (80W subwoofer + 40W soundbar) |
| Connectivity | Bluetooth 5.0, Optical, RCA, 3.5mm AUX, USB |
| Bluetooth Range | Up to 30 feet (9 meters) |
| Frequency Response | 40Hz - 20kHz |
| Drivers | 2x 2.5" full-range (soundbar); 1x 6.5" subwoofer |
| Input Voltage (Soundbar) | DC 12V 2A |
| Remote Control | Included (IR) |
| Mounting | Tabletop or wall-mountable (bracket included) |
| Cleaning | Wipe with dry, soft cloth; do not use liquids or solvents |
| Safety | Do not expose to rain or moisture; unplug during thunderstorms |
| Repairability | No user-serviceable parts; contact authorized service center |
| Warranty | 1 year limited |
Frequently Asked Questions - PSBVSUB20 Pyle
How do I connect my soundbar via Bluetooth?
Ensure the soundbar is in Bluetooth mode (press 'Source' until 'BT' shows). On your device, search for 'Pyle PSBVSUB20' and pair. If prompted, use PIN '0000'.
Can I use the soundbar without the subwoofer?
Yes, the soundbar can operate alone. The subwoofer is wireless and can be turned off separately. However, for best sound, use both together.
How do I reset the soundbar?
Press and hold the 'Power' button for 10 seconds until the LED flashes. This restores factory default settings.
What audio inputs are available?
The soundbar has Optical, RCA (red/white), 3.5mm AUX, and USB ports. Use the 'Source' button to switch.
My subwoofer is not producing sound; what should I do?
Check that the subwoofer is powered on (green LED) and within 30 feet of the soundbar. Re-pair by pressing the 'Pair' button on the subwoofer (back) and the soundbar's 'Pair' (if available) or cycle power.
Can I mount the soundbar on the wall?
Yes, a wall-mount bracket is included. Use appropriate wall anchors for your wall type. Ensure the bracket is securely attached before mounting the soundbar.
How do I clean the soundbar?
Unplug the device. Use a dry, soft cloth to gently wipe the exterior. Do not use water, cleaners, or abrasive materials.
What is the power consumption?
The total power output is 120W RMS. The actual power consumption is around 150W under normal use, but it varies depending on volume.
Does the soundbar support USB playback?
Yes, you can play MP3 files from a USB flash drive (up to 32GB). Use the 'Source' button to select USB. Files must be in FAT32 format.
The remote control is not working; what can I do?
First, replace the batteries (CR2025). Ensure there is no obstruction between remote and soundbar. Point the remote directly at the IR sensor. If still not working, try resetting the soundbar.
User questions about PSBVSUB20 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Soundbar in PDF format for free! Find your manual PSBVSUB20 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSBVSUB20 by Pyle.
USER MANUAL PSBVSUB20 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PSBVSUB20
Category : Soundbar