EX94000 - Uncategorized EtherWAN - Free user manual and instructions
Find the device manual for free EX94000 EtherWAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Ethernet Switch |
| Dimensions (WxDxH) | 440 x 300 x 44 mm (1U form factor) |
| Weight | 3.5 kg (approx.) |
| Power Supply | 100-240V AC, 50-60Hz, redundant options available |
| Main Functions | Layer 2 switching, VLAN support, QoS, SNMP management, port mirroring, link aggregation, storm control |
| Ports | 24 x 10/100/1000Base-T RJ-45, 4 x 1000Base-X SFP slots |
| Management | Web interface, CLI, SNMP v1/v2c/v3, RMON |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 10% to 90% non-condensing |
| Cooling | Fanless design or with smart fans (model dependent) |
| Installation | Rack-mount or desktop; includes mounting brackets |
| Maintenance | Clean with a soft, dry cloth. Avoid liquids. |
| Safety | Grounding recommended; use appropriate circuit protection |
| Spare Parts | Internal components not user-serviceable; contact technical support |
| Repairability | For qualified technicians only; no user-replaceable parts |
| Compliance | CE, FCC, RoHS |
| Warranty | 3 years limited warranty |
Frequently Asked Questions - EX94000 EtherWAN
How do I perform a factory reset on the EX94000?
Press and hold the reset button on the front panel for 10 seconds until the system LED blinks. The switch will reboot to factory defaults.
What is the default IP address for accessing the web interface?
The default IP is 192.168.1.1 with subnet mask 255.255.255.0. Use admin/admin as login credentials.
How do I update the firmware?
Go to System > Firmware Upgrade in the web interface, upload the .bin file, and confirm. Do not power off during upgrade.
Can I use SFP modules from other vendors?
The switch supports standard MSA-compliant SFP modules, but EtherWAN recommends using their own modules for best compatibility.
How to configure VLANs on the EX94000?
Navigate to VLAN > 802.1Q VLAN to create VLANs, assign ports, and set tagging. Use trunk ports for inter-switch links.
What should I do if the switch becomes unresponsive?
Try a power cycle (disconnect AC for 30 seconds). If unresponsive, perform a factory reset using the reset button.
How to set up port mirroring?
Under Monitor > Port Mirror, select the source port and destination port. The destination port will copy all traffic from the source.
Is this switch suitable for PoE?
The standard EX94000 model does not support PoE. Check the EX94000-PoE variant if PoE is required.
How to enable SNMP for network monitoring?
Go to Management > SNMP, enable SNMP, and set community strings (e.g., public for read-only). Use SNMP v2c or v3.
What is the typical power consumption?
The EX94000 consumes approximately 30W under full load without PoE. Use a power supply with suitable capacity.
User questions about EX94000 EtherWAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EX94000 - EtherWAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EX94000 by EtherWAN.
USER MANUAL EX94000 EtherWAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EtherWAN
Model : EX94000
Category : Uncategorized