EN400 - Uncategorized EtherWAN - Free user manual and instructions
Find the device manual for free EN400 EtherWAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Ethernet Switch |
| Dimensions (W x D x H) | 200 x 150 x 50 mm |
| Weight | 1.5 kg |
| Power Input | AC 100-240V, 50-60 Hz, 0.5A |
| Number of Ports | 8 x 10/100/1000Base-T |
| Uplink Ports | 2 x Gigabit SFP Slots |
| Switching Capacity | 20 Gbps |
| MAC Address Table Size | 8K |
| VLAN Support | IEEE 802.1Q up to 4K VLANs |
| Redundancy Protocols | STP, RSTP, MSTP, ERPS |
| QoS | 802.1p, DSCP, 8 priority queues |
| Management | Web GUI, CLI, SNMP v1/v2c/v3 |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Cooling | Fanless |
| Mounting | DIN Rail or Rackmount Kit optional |
| LED Indicators | Power, Link/Act, Speed, Fault |
| Spare Parts | Replacement power supply, mounting brackets |
| Maintenance | Clean with dry cloth; check ventilation regularly |
| Safety | Use grounded outlet; avoid moisture and direct sunlight |
Frequently Asked Questions - EN400 EtherWAN
How do I reset the EtherWAN EN400 to factory defaults?
Locate the reset button on the front panel. Press and hold it for 10 seconds using a paper clip. The device will reboot with default settings. The default IP address is 192.168.1.1.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username is admin and password is admin. It is recommended to change these after initial login.
Does the EN400 support PoE (Power over Ethernet)?
No, the EN400 is a non-PoE switch. It provides data-only connectivity. For PoE requirements, consider the EtherWAN PoE series models.
How can I update the firmware?
Download the latest firmware from the EtherWAN support website. Log into the web interface, go to Maintenance > Firmware Upgrade, select the file, and click upgrade. Do not power off during the process.
What management interfaces are available?
The switch supports Web GUI (HTTP/HTTPS), Command Line Interface (via Telnet/SSH), and SNMP (v1/v2c/v3) for network management.
How do I configure VLANs on the EN400?
Access the web GUI, navigate to Switching > VLAN. Create VLANs and assign ports accordingly. Ports can be set as access or trunk mode. Save and apply changes.
Can I use fiber optic connections?
Yes, the EN400 has two SFP slots for fiber or copper SFP modules. Ensure SFP modules are compatible with the switch (Gigabit, 1000BASE-SX/LX).
What should I do if the switch is not powering on?
Check the power cable and outlet. Verify the power input voltage is correct (AC 100-240V). If using a power socket, ensure the switch is securely connected. If the problem persists, contact EtherWAN support.
How do I back up the configuration?
In the web GUI, go to Maintenance > Configuration. Click Export to download the config file. To restore, import the file and reboot.
Is the EN400 suitable for outdoor use?
No, the EN400 is designed for indoor use only. Operating temperature is -10°C to 60°C. For outdoor applications, use a weatherproof enclosure.
User questions about EN400 EtherWAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EN400 - EtherWAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EN400 by EtherWAN.
USER MANUAL EN400 EtherWAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EtherWAN
Model : EN400
Category : Uncategorized