TR7G83W - Tumble dryer AEG - Free user manual and instructions
Find the device manual for free TR7G83W AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump Condenser Tumble Dryer |
| Brand | AEG |
| Model | TR7G83W |
| Capacity (Max Dry Weight) | 7 kg |
| Dimensions (H x W x D) | 85 x 59.6 x 63.6 cm |
| Weight | Approx. 45 kg |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption | 176 kWh per year |
| Noise Level | 65 dB(A) re 1 pW |
| Drum Type | Stainless steel, gentle drying |
| Number of Drying Programs | 15 (including Cotton, Synthetic, Delicates, Wool, Quick, Iron Aid, etc.) |
| Reverse Action | Yes |
| Anti-Crease Function | Yes (up to 90 min after cycle) |
| Filter Type | Lint filter (easy clean) |
| Water Tank | Removable, 4.5 L capacity |
| Condensation Efficiency Class | B (on standard cotton program) |
| Heat Pump Type | R290 refrigerant, eco-friendly |
| Child Lock | Yes |
| Delay Start | Yes (up to 20 hours) |
| Drum Light | Yes (LED) |
| Self-Cleaning Condenser | Yes (via Fluff Filter) |
| Power Supply | 220-240 V ~ 50 Hz, 10 A |
| Noise Emission Class | B |
| Spare Parts Availability | 7 years after purchase (via AEG service) |
Frequently Asked Questions - TR7G83W AEG
How do I clean the lint filter?
Open the door, pull the lint filter upwards, open it, and remove the lint by hand or with a soft brush. Rinse if necessary and allow to dry before reinserting. Do not use water on the filter holder.
How to empty the water tank?
Pull out the water tank from the bottom left corner, tilt to empty, and replace. Ensure the float indicator is not stuck. The tank holds about 4.5 liters.
Why does the drying cycle take too long?
Possible causes: overloaded drum, dirty lint filter, clogged condenser, or low room temperature. Also check if the program selected is appropriate for the fabric.
What does the error code 'E30' mean?
Error E30 typically indicates a blocked water drain system. Check the water tank and drain hose for kinks or blockages. Also ensure the pump filter (behind the kickplate) is clean.
Can I install the dryer in a small room?
Yes, the heat pump dryer does not require external venting. However, ensure adequate ventilation for heat dissipation (minimum gap of 5 cm on all sides). Do not block the ventilation grills.
How do I use the delay start function?
Select a drying program, then press the 'Delay Start' button repeatedly to set the desired delay (e.g., 3 hours). Press 'Start' and the dryer will finish after the set delay.
What items should not be tumble dried?
Items with foam rubber, plastics, wool (if not labeled for tumble drying), silk, and delicate fabrics not indicated for machine drying. Always check care labels.
How to clean the heat pump condenser?
Open the bottom flap, pull out the condenser unit, rinse with water (do not use detergent), and replace. Clean the seal area. This should be done every 1-2 months or when the 'Clean Condenser' indicator appears.
The drum light does not turn on. What should I do?
The drum light is an LED that cannot be replaced individually. If it fails, contact AEG service. For immediate use, the dryer will function normally without the light.
How do I activate the child lock?
Press and hold the 'Child Lock' button (usually marked with a key icon) for 3 seconds until the indicator shows. To deactivate, repeat the process. The control panel will be locked during operation.
User questions about TR7G83W AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual TR7G83W - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TR7G83W by AEG.
USER MANUAL TR7G83W AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : TR7G83W
Category : Tumble dryer