D5062 - Server MSI - Free user manual and instructions
Find the device manual for free D5062 MSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | MSI |
| Model | D5062 |
| Form Factor | Rackmount 2U |
| Dimensions (W x D x H) | 482.6 x 535 x 88.9 mm |
| Weight | 15 kg |
| Power Supply | Dual redundant 800W PSU |
| Processor Support | Intel Xeon Scalable |
| Memory | DDR4 ECC RDIMM, up to 1.5 TB |
| Storage Bays | 12x 3.5" hot-swap or 24x 2.5" hot-swap |
| Expansion Slots | 7x PCIe Gen3/4 |
| Network | Dual 10GbE ports |
| Management | IPMI 2.0 with remote console |
| Operating Temperature | 10°C to 35°C |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Easy access for HDD, fans, PSU; hot-swap |
| Cleaning | Use compressed air for dust removal |
| Spare Parts Availability | Through MSI service centers |
| Reparability | Hot-swap components for minimal downtime |
Frequently Asked Questions - D5062 MSI
How to install an operating system on the D5062?
Use a USB drive or network boot (PXE). Enter BIOS (F2 or Del) to set boot order. For RAID configuration, go to BIOS > Storage > Create RAID volume before installation.
How to reset the IPMI password?
Locate the IPMI reset jumper on the motherboard (refer to manual for position). Power off, move jumper to reset position, power on for 5 seconds, then restore jumper. Default IPMI credentials are usually admin/admin.
What is the maximum supported RAM?
Up to 1.5 TB of DDR4 ECC RDIMM. Use 16 GB or 32 GB modules. Mixing capacities may reduce performance.
How to configure RAID?
Enter BIOS setup by pressing F2 during boot. Navigate to the Storage or RAID menu. Select disks, choose RAID level (0,1,5,10), and apply. For advanced settings, use Intel RSTe or LSI utility.
Can third-party drives be used?
Yes, but ensure they meet interface (SATA/SAS) and form factor (3.5" or 2.5"). For SAS drives, an optional controller may be needed. Check compatibility list on MSI support site.
How to update the firmware (BIOS, IPMI, etc.)?
Download the latest firmware from MSI support. Use IPMI web interface (System > Firmware Update) or bootable USB with DOS utility. Always back up current settings.
What is the warranty period?
Typically 3 years limited warranty. Extensions may be available for purchase. Register product on MSI website to activate.
How to access remote management?
Connect to the dedicated IPMI port. By default, it uses DHCP; check router for assigned IP. Open browser, enter IP, login with default credentials (admin/admin). Change password immediately.
How to replace a failed power supply unit (PSU)?
The D5062 supports hot-swap PSUs. Locate the failed unit (indicator LED is red). Unplug AC cord, depress latch, slide PSU out. Insert new PSU until it clicks, reconnect power.
How to improve cooling in the server?
Ensure front bezel is clear, fans are clean. Check BIOS fan settings (Profile: Performance). If using high-power CPUs, install optional rear fan. Maintain ambient temperature below 35°C.
User questions about D5062 MSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual D5062 - MSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D5062 by MSI.
USER MANUAL D5062 MSI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MSI
Model : D5062
Category : Server