N1000a - Server MSI - Free user manual and instructions
Find the device manual for free N1000a MSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 1U |
| Dimensions (W x D x H) | 17.2 x 25.6 x 1.7 inches |
| Weight | 28 lbs (12.7 kg) |
| Power Supply | Dual 550W Redundant PSU |
| Processor Support | Intel Xeon E-2300 Series |
| Memory | 4x DDR4 ECC DIMM slots, up to 128GB |
| Storage | 4x 3.5" SATA/SAS hot-swap bays |
| Networking | 2x Gigabit Ethernet ports |
| Expansion Slots | 1x PCIe 3.0 x16 |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Cooling | 4x hot-swappable fans |
| Safety Certifications | FCC, CE, UL |
| Maintenance | Clean dust filters monthly; replace HDDs/PSUs hot-swap |
| Spare Parts Availability | RAM, HDD, PSU, fan kits via MSI support |
Frequently Asked Questions - N1000a MSI
How do I install the server in a rack?
Attach the included rack rails to the server and rack rails to the rack posts. Slide the server onto the rails and secure with screws. Ensure proper ventilation and cable management.
What is the default IPMI IP address?
The default IPMI IP is 192.168.0.1. You can access it via web browser using admin as username and password set during first boot.
Can I upgrade the memory?
Yes, the server supports DDR4 ECC memory. Install in matching pairs for optimal performance. Maximum capacity is 128GB across 4 slots.
How do I perform a factory reset?
Press and hold the reset button on the front panel for 10 seconds. Alternatively, use the IPMI interface to factory reset the BIOS settings.
What type of hard drives are supported?
The server supports 3.5-inch SATA and SAS hard drives. SSDs also work but require a 2.5-inch to 3.5-inch adapter.
How to clean the server?
Power off and disconnect all cables. Remove the top cover and use compressed air to blow dust from fans and heat sinks. Clean filters monthly with vacuum.
Is the power supply hot-swappable?
Yes, the dual redundant power supplies are hot-swappable. To replace, press the latch and slide out the failed unit, then insert a new one.
What should I do if the server overheats?
Check that fans are spinning and filters are clean. Ensure ambient temperature is below 35°C. The server will shut down automatically if critical temperature is reached.
How to update BIOS or firmware?
Download the latest version from MSI website. Use the DOS utility via USB boot or update through IPMI web interface under Maintenance.
What is the warranty period?
MSI offers a standard 3-year limited warranty. Extended warranty options are available through authorized resellers.
User questions about N1000a MSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual N1000a - MSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N1000a by MSI.
USER MANUAL N1000a MSI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MSI
Model : N1000a
Category : Server