D3065 - Server MSI - Free user manual and instructions
Find the device manual for free D3065 MSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 2U |
| Dimensions (W x D x H) | 17.2 x 27.5 x 3.5 inches |
| Weight | 25 lbs (11.3 kg) |
| Power Supply | Dual redundant 800W hot-swappable |
| Processor Support | Dual Intel Xeon Scalable |
| Memory | 8 DIMM slots, DDR4 ECC, up to 512GB |
| Storage | 8 x 2.5" hot-swap SATA/SAS bays |
| RAID Support | Hardware RAID 0, 1, 5, 10 |
| Network | 2 x Gigabit Ethernet, 1 x management port |
| Main Functions | Data storage, virtualization, cloud computing, enterprise applications |
| Maintenance | Regular dust removal, fan filter cleaning every 3 months |
| Safety | ESD grounding required, secure rack mounting, temperature monitoring |
| Spare Parts & Repairability | Hot-swap drives, PSU, fans, RAM; user-replaceable components |
| General Information | Brand: MSI, Model: D3065, Server class: Enterprise |
Frequently Asked Questions - D3065 MSI
How do I install an operating system on the MSI D3065 server?
To install an OS, first configure RAID in the BIOS during boot (press Ctrl+I). Then boot from installation media (USB/DVD) and follow the on-screen setup. Ensure drivers for storage and network are loaded if needed.
How do I configure RAID on the D3065?
Enter the BIOS during POST (press Del). Navigate to the Advanced menu, select RAID Configuration, and choose the desired RAID level (0,1,5,10). Assign disks and save changes. Alternatively, use the dedicated RAID controller utility during boot.
Can I use third-party memory modules?
The server supports standard DDR4 ECC RDIMM or LRDIMM memory. For stability, use modules from MSI's QVL (Qualified Vendor List). Mixing different speeds or capacities may cause instability.
How do I replace a failed hard drive?
Identify the failed drive via the status LED (amber/red). Pull the drive handle to release and slide out the carrier. Insert a new hot-swap drive of the same type and capacity, then push the handle to lock. The RAID controller will rebuild automatically if configured.
What is the default administrator password?
The default BIOS password is empty (press Enter). The BMC/iLO default credentials are often admin/admin. Change them immediately after initial setup to ensure security.
How do I perform a factory reset?
Power off the server, remove the CMOS battery for 10 seconds, or short the CLR_CMOS jumper on the motherboard. This resets BIOS settings to defaults. For BMC reset, use the dedicated reset button or software command.
What are the operating temperature limits?
The server operates safely between 10°C to 35°C (50°F to 95°F) with relative humidity of 20% to 80% non-condensing. Ensure proper airflow in the rack and avoid blocking vents.
How do I update the firmware?
Download the latest firmware from the MSI support website. Use the BMC web interface to upload and apply updates. Alternatively, create a bootable USB with the firmware file and run the update from DOS or UEFI shell.
Does the D3065 support virtualization?
Yes, it supports VMware ESXi, Hyper-V, and KVM. Enable Intel VT-x and VT-d in BIOS. Ensure sufficient RAM and storage for virtual machines.
How do I connect to the remote management interface?
The server includes a dedicated management port (labeled BMC/iLO). Assign an IP address via DHCP or static configuration in BIOS. Access via web browser using https:// with default credentials. This allows remote console, power control, and sensor monitoring.
User questions about D3065 MSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual D3065 - MSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D3065 by MSI.