8300FP - Uncategorized Haws - Free user manual and instructions
Find the device manual for free 8300FP Haws in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Emergency Eyewash Station |
| Brand | Haws |
| Model | 8300FP |
| Material | High-impact ABS plastic |
| Capacity | 6 gallons (22.7 liters) |
| Flow Rate | 0.4 GPM (1.5 L/min) per ANSI Z358.1 |
| Flushing Time | 15 minutes |
| Dimensions (H x W x D) | 24 x 12 x 12 inches (61 x 30.5 x 30.5 cm) |
| Weight (empty) | 6 lbs (2.7 kg) |
| Power Source | None (gravity-fed, manual operation) |
| Mounting | Wall-mounted or portable |
| Activation | Pull down or push trigger |
| Certification | ANSI Z358.1 compliant |
| Operating Temperature | 40-100°F (4-38°C) |
| Maintenance | Flush weekly; inspect and clean nozzles |
| Water Quality | Potable water recommended; use preservative if stored |
| Included Accessories | Wall bracket, instruction manual |
| Spare Parts | Replacement nozzles, dust caps, and valve assemblies |
| Repairability | User-serviceable; parts available from Haws |
Frequently Asked Questions - 8300FP Haws
How often should I test the Haws 8300FP eyewash?
It is recommended to activate the eyewash weekly to ensure proper flow and flush any sediment. Also perform a full inspection monthly as per ANSI Z358.1 standards.
Can the 8300FP be used with tap water?
Yes, but potable water is recommended. If the unit is stored without use, add a preservative solution to prevent bacteria growth. Change water every 6 months.
Where should I mount the device?
Mount the unit within 10 seconds reach of potential hazards, typically in a laboratory or industrial area. Ensure it is on a wall at a height of about 33-45 inches from the floor.
How do I activate the eyewash?
Pull down the clamshell cover or push the trigger (depending on model variant). The water will flow automatically and continue until the tank is empty or manually stopped.
What is the water capacity and flushing time?
The tank holds 6 gallons (22.7 liters), providing 15 minutes of flushing at 0.4 GPM, meeting ANSI requirements.
How do I clean the nozzles?
Remove the dust caps and use a soft brush or compressed air to clear debris. Soak nozzles in a mild soap solution if needed, then rinse thoroughly.
Is the unit portable?
Yes, the 8300FP can be used as a portable unit with optional carrying handle, or it can be wall-mounted using the included bracket.
What are the dimensions and weight?
The unit measures 24 x 12 x 12 inches (61 x 30.5 x 30.5 cm) and weighs 6 lbs (2.7 kg) empty.
Can I replace the valve or nozzles myself?
Yes, these are user-serviceable parts. Replacement kits are available from Haws. Always turn off water supply and drain unit before repairs.
What should I do if the water does not flow?
Check that the tank is filled and the valve is open. If the nozzle is clogged, clean it. If the problem persists, inspect the inlet filter or contact Haws support.
User questions about 8300FP Haws
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 8300FP - Haws and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8300FP by Haws.
USER MANUAL 8300FP Haws
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Haws
Model : 8300FP
Category : Uncategorized