7360B - Shower system Haws - Free user manual and instructions
Find the device manual for free 7360B Haws in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Emergency Shower System |
| Brand | Haws |
| Model | 7360B |
| Application | Industrial safety, laboratory, healthcare |
| Overall Height | Approximately 96 inches (244 cm) |
| Shower Head Diameter | 10 inches (25.4 cm) |
| Pipe Diameter | 1 inch (2.54 cm) NPT |
| Weight | Approximately 25 lbs (11.3 kg) |
| Material | Galvanized steel pipe, brass fittings, ABS plastic shower head |
| Activation | Pull rod or push handle (stay-open ball valve) |
| Flow Rate | 20 GPM (75.7 L/min) at 30 PSI |
| Water Supply | Cold water only, 1/2 inch or 3/4 inch NPT |
| Minimum Water Pressure | 30 PSI (2.07 bar) |
| Maximum Water Pressure | 120 PSI (8.27 bar) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Compliance | ANSI Z358.1-2014 |
| Maintenance | Weekly activation test, annual inspection |
| Repair Parts | Shower head, valve assembly, pull rod available |
| Includes | Shower head, pipe, floor flange, valve, pull rod |
Frequently Asked Questions - 7360B Haws
What is the recommended installation height for the Haws 7360B emergency shower?
The shower head should be installed at a height of 82 to 96 inches (208 to 244 cm) from the floor, as per ANSI Z358.1 standards.
What water pressure is required for proper operation?
A minimum of 30 PSI (2.07 bar) is required to achieve the rated flow of 20 GPM. Maximum pressure is 120 PSI (8.27 bar).
How do I activate the shower?
The shower is activated by pulling the pull rod or pushing the handle. The valve stays open until manually closed to ensure continuous flow.
How often should the shower be tested?
The ANSI Z358.1 standard recommends a weekly activation test to flush the line and verify operation. An annual more thorough inspection is also required.
Can the Haws 7360B be used in freezing conditions?
This model is not designed for freezing conditions. It should be installed in a heated area or protected with freeze protection equipment.
What is the flow rate of the 7360B?
The flow rate is 20 gallons per minute (75.7 L/min) at 30 PSI, meeting ANSI requirements.
Are replacement parts available for this model?
Yes, Haws offers replacement parts including shower heads, valve assemblies, pull rods, and floor flanges. Contact Haws or an authorized distributor.
What materials are used in the construction?
The pipe is galvanized steel, fittings are brass, and the shower head is ABS plastic.
Does the 7360B come with a floor flange?
Yes, the floor flange is included for mounting the pipe to the floor. Additional mounting hardware may be required.
Can the shower head be adjusted or removed for cleaning?
The shower head is fixed but can be removed for cleaning by unscrewing it from the pipe. Ensure the water supply is off before removal.
User questions about 7360B Haws
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Shower system in PDF format for free! Find your manual 7360B - Haws and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7360B by Haws.
USER MANUAL 7360B Haws
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Haws
Model : 7360B
Category : Shower system