9321 - Uncategorized Haws - Free user manual and instructions
Find the device manual for free 9321 Haws in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Emergency Eyewash Station |
| Brand | Haws |
| Model | 9321 |
| Material | Stainless Steel |
| Mounting Type | Wall-mounted |
| Flow Rate | 11.4 L/min (3.0 GPM) at 30 psi |
| Water Supply Connection | 1/2" NPT female |
| Activation Method | Push-handle with stay-open valve |
| Spray Heads | Two aerated spray heads |
| Dust Cover | Flip-top dust cover included |
| Overall Dimensions (W x H x D) | 15.5" x 12.5" x 8.5" (39.4 x 31.8 x 21.6 cm) |
| Weight | 10 lbs (4.5 kg) |
| Compliance Standards | ANSI Z358.1-2014 |
| Operating Pressure Range | 30-90 psi (2.1-6.2 bar) |
| Water Temperature | Tepid water recommended (60-100°F / 16-38°C) |
| Maintenance | Weekly activation to flush line; annual inspection |
| Replacement Parts | Spray heads, dust cover, push handle assembly available |
| Warranty | Limited lifetime warranty against manufacturing defects |
| Country of Origin | USA |
Frequently Asked Questions - 9321 Haws
How do I install the Haws 9321 eyewash station?
Installation requires mounting the unit to a wall at a height of 33-45 inches from the floor. Connect to a cold water supply using a 1/2" NPT fitting. Ensure the water pressure is between 30 and 90 psi. Follow the included installation manual for detailed steps.
How often should I test the eyewash station?
Activate the eyewash weekly for at least 3 seconds to flush the line and ensure proper operation. Conduct a full flow test annually per ANSI Z358.1-2014 standards.
What water pressure is required for proper operation?
The recommended water pressure range is 30 to 90 psi (2.1 to 6.2 bar). Pressures outside this range may affect flow rate and performance.
Is the Haws 9321 compliant with ANSI standards?
Yes, it is designed to meet ANSI Z358.1-2014 requirements for emergency eyewash equipment, including flow rate, pattern, and activation.
How do I clean and maintain the eyewash station?
Clean the exterior with a mild detergent and water. For the spray heads, remove and soak in a vinegar solution to remove mineral deposits. Replace the dust cover after cleaning. Avoid harsh chemicals.
Can the 9321 be used for eye and face injuries?
Yes, the twin spray heads provide dual coverage to rinse both eyes simultaneously. It is suitable for eye injuries but not for full face or body immersion.
What replacement parts are available for this model?
Common replacement parts include spray head assemblies, dust covers, push handle handles, and valve cartridges. Contact Haws customer service or authorized distributors.
What water temperature should be used?
Tepid water (60-100°F / 16-38°C) is recommended to encourage a full 15-minute flush. Cold water can cause hypothermia, and hot water can scald.
How long should I flush my eyes after exposure?
ANSI recommends a minimum 15-minute flush at a flow rate of 11.4 L/min. Seek medical attention immediately after flushing.
Does the Haws 9321 come with a warning sign?
Yes, the unit typically includes a high-visibility sign to indicate the location of the eyewash station. Additional signs can be ordered separately.
User questions about 9321 Haws
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 9321 - Haws and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9321 by Haws.
USER MANUAL 9321 Haws
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Haws
Model : 9321
Category : Uncategorized