ATT-300CC - Turntable AKAI - Free user manual and instructions
Find the device manual for free ATT-300CC AKAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Turntable (Record Player) |
| Brand | AKAI |
| Model | ATT-300CC |
| Dimensions (W x D x H) | Approx. 420 x 360 x 120 mm |
| Weight | Approx. 5 kg |
| Power Supply | AC 120V/60Hz or 230V/50Hz (depending on region) |
| Power Consumption | 10 W |
| Drive System | Belt drive |
| Speeds | 33 1/3 and 45 RPM |
| Turntable Platter | Aluminum die-cast |
| Tone arm | Static balanced, with anti-skating adjustment |
| Cartridge | Moving Magnet (MM) type, included |
| Stylus | Diamond tip, replaceable |
| Output | Phono (RCA) and built-in preamp (switchable) |
| Material | MDF base with veneer finish |
| Dust Cover | Hinged, acrylic |
| Maintenance | Clean stylus with soft brush; keep platter dust-free |
| Safety | Automatic return and stop at end of record |
| Spare Parts | Stylus, belt, cartridge available from AKAI service centers |
Frequently Asked Questions - ATT-300CC AKAI
How do I set up the turntable for the first time?
Unpack the turntable, place it on a level surface, install the platter and belt, balance the tonearm using the counterweight, set the anti-skating dial, and connect the power and audio cables.
Why is the sound distorted or muffled?
Check if the stylus is dirty or worn. Clean it with a soft brush or replace it. Also ensure the turntable is placed on a stable surface and the speakers are not too close to the turntable.
How can I change the playback speed from 33 to 45 RPM?
Locate the speed selector button or switch, usually near the platter or on the front panel. Press it to toggle between 33 and 45 RPM. Some models may require manually moving the belt.
What type of cartridge does the ATT-300CC use?
It uses a standard moving magnet (MM) cartridge. The included cartridge is replaceable; you can upgrade to higher quality MM cartridges that fit the tonearm.
How do I connect the turntable to my speakers?
If your speakers have a built-in phono preamp, connect using RCA cables. Otherwise, set the turntable's built-in preamp switch to 'LINE' and connect to an auxiliary input.
My turntable is not spinning. What should I do?
Check the power connection and ensure the belt is properly fitted around the motor pulley and platter. If the belt is stretched or broken, replace it.
How often should I replace the stylus?
Replace the stylus after approximately 500-1000 hours of use, or when you notice distorted sound or visible wear. Regular cleaning extends its life.
Can I play 78 RPM records on this turntable?
No, the ATT-300CC only supports 33 1/3 and 45 RPM. Playing 78 RPM may damage the records or the turntable.
How do I adjust the tracking force?
Balance the tonearm first by setting the counterweight until the tonearm floats level. Then rotate the numbered ring to the recommended tracking force (typically 2-3 grams for MM cartridges).
Is the turntable compatible with Bluetooth speakers?
No, this model does not have Bluetooth. You can connect via RCA cables to a receiver with Bluetooth output, or use an external Bluetooth transmitter.
User questions about ATT-300CC AKAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual ATT-300CC - AKAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATT-300CC by AKAI.
USER MANUAL ATT-300CC AKAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AKAI
Model : ATT-300CC
Category : Turntable