GE-DP 7035 N-A ECO - Water pump EINHELL - Free user manual and instructions
Find the device manual for free GE-DP 7035 N-A ECO EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Dirty Water Pump |
| Power | 750 W |
| Voltage | 230 V ~ 50 Hz |
| Max. Delivery Head | 7 m |
| Max. Flow Rate | 15,600 L/h |
| Max. Particle Size | 35 mm |
| Connection Thread | 1 1/2" (35 mm) |
| Cable Length | 10 m |
| Protection Class | IPX8 |
| Housing Material | Stainless Steel / Plastic |
| Weight | 6.5 kg |
| Dimensions (L x W x H) | 25 x 25 x 38 cm |
| Float Switch | Yes, adjustable |
| Special Features | ECO mode, thermal protection, integrated check valve |
| Maintenance | Clean after use, check seals annually |
| Spare Parts Availability | Yes, via Einhell service |
Frequently Asked Questions - GE-DP 7035 N-A ECO EINHELL
Can the pump run dry?
No, the GE-DP 7035 N-A ECO should never be operated without water as it may damage the pump and void the warranty.
What is the maximum particle size the pump can handle?
The pump can handle particles up to 35 mm in diameter, making it suitable for dirty water with small debris.
How do I adjust the float switch?
The float switch is adjustable by moving the float along the cable. A shorter cable length raises the switch-off point, while a longer length lowers it.
Is the pump suitable for seawater?
No, the pump is designed for fresh water only. Using it with seawater or corrosive liquids can cause corrosion and damage.
How do I clean the pump after use?
Rinse the pump with clean water to remove dirt and debris. Do not use aggressive chemicals. Store it in a dry, frost-free place.
Why is the pump not starting?
Check the power supply, ensure the float switch is not stuck in the OFF position, and verify that the thermal protection has not tripped. Allow the pump to cool down if needed.
What is the maximum immersion depth?
The maximum immersion depth is 5 meters below water level. Do not exceed this depth to avoid pressure damage.
Can I use an extension cord?
Yes, but use only a waterproof extension cord with a cross-section of at least 1.5 mm² and a length no longer than 30 meters to prevent voltage drop.
How often should I replace the seals?
Inspect the seals annually. If you notice water ingress or oil leakage from the seal chamber, replace them immediately. Refer to the manual for seal replacement.
What does the ECO mode do?
The ECO mode reduces energy consumption by automatically adjusting the pump's motor speed based on water level, improving efficiency.
User questions about GE-DP 7035 N-A ECO EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual GE-DP 7035 N-A ECO - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GE-DP 7035 N-A ECO by EINHELL.
USER MANUAL GE-DP 7035 N-A ECO EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : GE-DP 7035 N-A ECO
Category : Water pump