GP 4000 - Water pump EINHELL - Free user manual and instructions
Find the device manual for free GP 4000 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | Einhell |
| Model | GP 4000 |
| Maximum Flow Rate | 4000 L/h |
| Maximum Delivery Head | 35 m |
| Maximum Suction Depth | 8 m |
| Nominal Power | 800 W |
| Supply Voltage | 230 V ~ 50 Hz |
| Motor Type | Asynchronous Electric Motor |
| Thermal Protection | Yes |
| Connection | 1" (25.4 mm) threaded |
| Dimensions (L x W x H) | 30 x 20 x 25 cm |
| Weight | 8.5 kg |
| Housing Material | Gray Cast Iron |
| Self-Priming Function | Yes |
| Application | Watering, pumping clear water |
| Maintenance and Cleaning | Clean the suction filter regularly. Drain before frost. |
| Safety | Built-in thermal protection switch. Use a residual current circuit breaker. |
| Spare Parts and Repairability | Seal, check valve, impeller available. Repairable by a professional. |
Frequently Asked Questions - GP 4000 EINHELL
How to prime the GP 4000 pump?
To prime the pump, fill the pump body with water through the filling port before starting. Make sure the suction hose is immersed and free of air.
What is the maximum suction depth?
The maximum suction depth is 8 meters. Beyond that, the pump may not work properly.
Can the pump be used for dirty water?
No, this pump is designed for clear water. Water containing sand or particles can damage the impeller and seals.
How to protect the pump in winter?
Before winter, completely empty the pump and hoses. Store it in a dry, frost-free place. Frost can crack the cast iron body.
What to do if the pump does not start?
Check the power supply, the fuse, and that the residual current circuit breaker has not tripped. Make sure the pump is properly primed.
What is the maximum delivery head?
The maximum delivery head is 35 meters. This corresponds to the maximum pressure the pump can generate.
How to clean the pump filter?
Unscrew the suction filter cap, remove the filter and clean it with clean water. Reassemble carefully before use.
Can I let the pump run continuously?
The pump is not designed for continuous operation. Observe the on/off cycles indicated in the manual to avoid overheating.
What type of oil to use for the pump?
Some models require motor oil. Check the oil level via the fill cap and use SAE 20W20 or equivalent oil.
How to replace the pump seal?
Disconnect the pump, drain it, then disassemble the body. Replace the damaged seal with a new one. Reassemble in reverse order.
User questions about GP 4000 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual GP 4000 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GP 4000 by EINHELL.
USER MANUAL GP 4000 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : GP 4000
Category : Water pump