PDU20SWT8FNET - Switch CyberPower - Free user manual and instructions
Find the device manual for free PDU20SWT8FNET CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched Power Distribution Unit (PDU) |
| Dimensions (H x W x D) | 17.5 x 1.75 x 8.5 inches (1U rackmount) |
| Weight | 8.5 lbs (3.9 kg) |
| Power Input | 20A, 120V, NEMA 5-20P plug |
| Outlets | 8 x NEMA 5-20R |
| Power Cord Length | 10 feet |
| Management | SNMP, web interface, Telnet, SSH |
| Remote Monitoring | Power, voltage, current, temperature, humidity |
| Outlet Control | Individual outlet switching via network |
| Certifications | UL, cUL, FCC |
| Warranty | 3 years |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Operating Humidity | 5% to 95% non-condensing |
| Material | Metal housing |
| Installation | 1U rackmount with included brackets |
| Indicators | LEDs for power, network, and outlet status |
| Security | SSL, SSH, user authentication |
| Power Monitoring | Real-time power consumption per outlet and total |
| Environmental Monitoring | Supports external temperature/humidity sensor (optional) |
| Firmware Upgrade | Via network using web interface or TFTP |
| Compliance | RoHS |
| Package Contents | PDU, rackmount brackets, power cord, quick start guide |
Frequently Asked Questions - PDU20SWT8FNET CyberPower
How do I set up the CyberPower PDU20SWT8FNET for the first time?
Mount the PDU in a 1U rack space using the included brackets. Connect the power cord to a 20A outlet. Connect devices to the outlets. Attach an Ethernet cable from the PDU's network port to your LAN. The PDU will obtain an IP via DHCP by default. Check your router's DHCP client list to find the IP address, then access the web interface using that IP.
How do I access the web interface?
Open a web browser and enter the IP address of the PDU. The default username is 'admin' and password is 'admin' (both case-sensitive). For security, change the password immediately after first login.
How can I reset the PDU to factory default settings?
Press and hold the reset button on the front panel for about 10 seconds using a paperclip or similar tool. The PDU will reboot with factory defaults, including IP set to DHCP.
How do I update the firmware?
Download the latest firmware from the CyberPower website. In the web interface, go to Maintenance > Firmware Upgrade. Browse for the firmware file and click 'Upload'. Do not interrupt power during the update. The PDU will reboot automatically.
How can I monitor power usage?
The PDU provides real-time monitoring of voltage, current, and power (in watts) per outlet and overall. Access the web interface or use SNMP. You can also view historical data if configured in the logging settings.
How do I control outlets remotely?
Log into the web interface. Under the 'Outlets' section, you can view each outlet's status (ON/OFF) and click to toggle. You can also schedule on/off times, reboot, or set delay sequences.
What is the maximum load for this PDU?
The PDU is rated for 20A input. The maximum total load is 20A (2400W at 120V). Do not exceed this rating. Each outlet is also limited by the circuit breaker, typically 20A shared among outlets.
What do the LED indicators mean?
The front panel has LEDs for power (green when on), network link/activity, and outlet status. A solid green outlet LED indicates the outlet is on; off means off. The network LED blinks with activity. Refer to the manual for specific LED behavior.
How do I configure SNMP?
Log into the web interface. Go to Settings > SNMP. Enable SNMP and set the community strings (public/private). You can also configure SNMPv3 for enhanced security. The PDU supports MIB files for monitoring with NMS software.
I cannot connect to the PDU web interface. What should I do?
First, verify the PDU has power and the network cable is connected. Check that the PDU obtained an IP address via DHCP (if used) by viewing the router's DHCP list. Try a different Ethernet cable or port. If still unreachable, perform a factory reset (see FAQ) to restore default IP settings.
User questions about PDU20SWT8FNET CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PDU20SWT8FNET - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU20SWT8FNET by CyberPower.
USER MANUAL PDU20SWT8FNET CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU20SWT8FNET
Category : Switch