SURFboard SB4200 - Cables for Computers and Peripherals Arris - Free user manual and instructions
Find the device manual for free SURFboard SB4200 Arris in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cable Modem |
| Brand | Arris |
| Model | SURFboard SB4200 |
| Category | Cables for Computers and Peripherals |
| DOCSIS Standard | DOCSIS 1.0 / 1.1 |
| Ethernet Ports | 1x RJ-45, 10/100 Mbps |
| Dimensions (W x D x H) | 6.9 x 4.5 x 1.1 inches |
| Weight | 0.5 lbs |
| Power Supply | 12V DC, 500 mA |
| Power Consumption | 6 W (max) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| LED Indicators | Power, Receive, Send, Online, PC Activity |
| Reset Button | Yes, rear panel |
| Frequency Range | 88-860 MHz (downstream), 5-42 MHz (upstream) |
| Modulation | 64/256 QAM (downstream), QPSK/16 QAM (upstream) |
| Security | Baseline Privacy Interface (BPI) for network security |
| Compliance | FCC Part 15, Class B |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids. |
| Spare Parts & Repairability | No user-serviceable parts. Contact your service provider. |
| Safety Warnings | Keep away from water, heat sources, and direct sunlight. |
Frequently Asked Questions - SURFboard SB4200 Arris
How do I reset my SURFboard SB4200 to factory defaults?
Press and hold the reset button on the rear panel for about 10 seconds until the LEDs blink. Release and wait for the modem to reboot.
What do the LED lights on my SB4200 mean?
Power: solid = on. Receive: blinking = scanning, solid = locked. Send: blinking = scanning, solid = locked. Online: solid = registered. PC Activity: solid = ethernet link, blinking = data activity.
Is the SB4200 compatible with my internet provider?
It is compatible with most cable providers that support DOCSIS 1.0/1.1. Check with your ISP for compatibility.
Why is my modem not coming online?
Ensure all cable connections are tight, power cycle the modem, and verify your internet service is active. If the issue persists, contact your provider.
Can I use the SB4200 with a router?
Yes, connect the modem's Ethernet port to the router's WAN port. The modem operates in bridge mode by default.
How do I clean my modem?
Use a dry, soft cloth to wipe the exterior. Avoid liquids, sprays, or abrasive cleaners.
What should I do if my modem gets wet?
Immediately unplug it and dry it thoroughly. Do not use until completely dry. If damaged, replace the modem.
Does the SB4200 support IPv6?
No, the SB4200 supports only IPv4. For IPv6, consider a newer modem.
How can I improve my internet speed?
Ensure strong coaxial cable connections, avoid signal splitters, and check your ISP plan. The SB4200 is limited to 10/100 Mbps Ethernet.
Where can I download the user manual?
You can download the PDF manual for free from notice-facile.com or other online resources.
User questions about SURFboard SB4200 Arris
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cables for Computers and Peripherals in PDF format for free! Find your manual SURFboard SB4200 - Arris and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SURFboard SB4200 by Arris.
USER MANUAL SURFboard SB4200 Arris
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Arris
Model : SURFboard SB4200
Category : Cables for Computers and Peripherals